26 October 2021 in IEEE Open Journal of the Communications Society
We consider a method for developing a radio-wave propagation prediction model in a mountainous forested area. A new path loss development approach uses a free-space path loss (FSPL) model and an empirical path loss model. To improve the prediction accuracy, the transmission path distance, free space area, and forest area were calculated separately. We obtained the transmission path distance for free space and forest areas from the digital surface model (DSM), which represents surface elevation information, including vegetation and object height. In this study, the results showed that by combining the empirical model with FSPL for free space area, the accuracy for all the empirical models was improved. We confirmed that the transmission distance calculation of the free space area and forest area with a combination of the empirical models showed a better performance than the model with physical distance. The predicted model results were validated using the actual radio wave propagation in the 920 MHz band measurement data. The overall path loss prediction accuracy was improved for the empirical models average of 8.05 dB on the experimental data.
1 October 2016 in Journal of Applied Remote Sensing
A method for estimating the height of rice plants, using three-dimensional laser range data from point clouds, is proposed and assessed. Rice plant height () is estimated using a reference position at the top of the rice plant, avoiding the need to determine the ground position. Field experiments were performed with a SICK LMS 200 laser scanner in 2013 and 2014 on a test field with five different planting geometries. Percentile analysis identified the closest percentile to the top of the rice plant (), with vertical distances at the first percentile unaffected by planting geometry. The plant bottom position was identified using three different percentile ranks (, , and ). Relative vertical distances () were computed from the difference between the top and bottom positions of the rice plant. These correlated well with measured , with slopes greater than 1.0. A greater number of stems in 2014 led to steeper slopes. Estimated was more accurate when plant bottom positions were closer to the ground surface, and the best results were obtained with (; ). Overall, was typically 16.0 cm greater than with .
30 November 2002 in Japanese Journal of Applied Physics
1 January 1999 in Sen'i Gakkaishi
The thermal decomposition behavior in air of flame-retardant cotton/polyester (C/P) blended yarn fabrics was investigated by thermogravimetry-differential thermal analysis/mass spectrometry. Pyrovatex CP New and tetrabromobisphenol A (TBP-A) were used as flame retardants. When the fabric was treated with Pyrovatex CP New, the evolved gases in thermal decomposition, such as water, methanol and carbon dioxide, were analyzed from the mass profile data at m/z 18, 31 and 44. These results suggested that phosphonopropionic acid, which was liberated from N-methylol 3-(dimethyl phosphono) propionamide, the main component of Pyrovatex CP New, promotes the dehydration and carbonization of cotton cellulose. On the other hand, the TG curve of treated fabric with TBP-A showed that TBP-A promotes the thermal decomposition of fabric. The evolution behavior of water and carbon dioxide obtained from the mass profile data at m/z 18 and 44 suggested that the acceleration of thermal decomposition occurs in cotton. When the fabric was treated with Pyrovatex CP New and TBP-A by two-component sequential treatment, TBP-A did not promote the thermal decomposition of fabric and was released in the gas phase above 300°C. From this result, it is thought that Pyrovatex CP New treatment inhibits the acceleration of thermal decomposition. It is concluded that Pyrovatex CP New and TBP-A give a flame retardancy to C/P blended yarn fabric in the condensed phase and the gas phase, respectively.
1 July 2017 in Journal of Applied Remote Sensing
The number of rice-plant stems (S), directly affecting the competition among rice plants and contributing to rice yield, is estimated from laser data. The laser data were normalized to eliminate the increasing plant height effect. Relative spatial volume (rVslaser) was derived and scaled as an exponential function of S. A relationship between rVslaser and S is confirmed in two growing seasons (2014 and 2016, separately obtained by two different laser scanners). The scaling and exponent factors (β and α) depended on the planting geometry, planting density, and bottom position of the rice plants (Dbottom) but were almost independent of the number of divided layers in the rVslaser computation. From the estimated stem number using Dbottom at the 80th percentile (D80), the maximum S was obtained at ∼50 days after transplanting. In both years, the relative error in the estimate was below 0.10, and the bias was small. In the models with D80 in 2014 (MD201480) and D95 in 2016 (MD201695), the β and α values were very similar. Using the rVslaser measure, we can disregard the footprint characteristics and voxel size. The presented results support the proposed approach as a useful future method for estimating rice-plant stems.