Development of objective measurements is an important requirement for establishing performance-based standards for protective clothing used while handling pesticide. This study, the second in a two-part series, reports on the work completed to evaluate the performance of approximately 100 fabrics that are either used or have the potential to be used for garments worn by operators while applying pesticides. Part I, published separately, provides an overview of these issues and describes research undertaken to select a test chemical for use in subsequent studies. The goals of this study were first to develop a comprehensive approach to evaluate the performance of garments currently being used by pesticide operators, and second, to use the laboratory and field data in the development of performance specifications.
8 January 2004 in International Journal of Occupational Safety and Ergonomics
Penetration of liquid pesticides through textile materials is a criterion for determining the performance ofprotective clothing used by pesticide handlers. The pipette method is frequently used to apply liquid pesticides onto textile materials to measure penetration. Typically, analytical techniques such as gas chromatography (GC) are used to measure percentage penetration. These techniques are labor intensive and costly. A simpler gravimetric method was developed, and tests were conducted to compare the gravimetric and GC methods of analysis. Three types of pesticide formulations and 4 fabrics were used for the study. Diluted pesticide formulations were pipetted onto the test specimens and percentage penetration was measured using the 2 methods. For homogeneous formulation, the results of the 2 methods were fairly comparable. However, due to the filtering action of the textile materials, there were differences in the percentage penetration between the 2 methods for formulations that were not homogeneous.
22 January 2018 in Journal of Consumer Protection and Food Safety
A collaborative approach, involving resources and expertise from several countries, was used to develop a test cell to measure cumulative permeation by a solid-state collection technique. The new technique was developed to measure the permeation of pesticide active ingredients and other chemicals with low vapor pressure that would otherwise be difficult to test via standard techniques. The development process is described and the results from the final chosen test method are reported. Inter-laboratory studies were conducted to further refine the new method and determine repeatability and reliability. The revised test method has been approved as a new ISO/EN standard to measure permeation of chemicals with low vapor pressure and/or solubility in water.
2 September 2025 in ACS Agricultural Science & Technology