Guangxi Key Laboratory of Optoelectronic Information Processing, School of Optoelectronic Engineering, Guilin University of Electronic Technology, Guilin, China
Auto-generated profile, based on publicly available information
Shiliang Qu
Guangxi Key Laboratory of Optoelectronic Information Processing, School of Optoelectronic Engineering, Guilin University of Electronic Technology, Guilin, China
A novel multi-focusing metalens in the longitudinal direction has been proposed and investigated based on the equal optical path principle, which is independent on the incident polarizations and can be suitable for both of the linear and circular polarization incidences simultaneously. Here, three novel designing principles: partitioned mode, radial alternating mode and angular alternating mode, have been proposed firstly for constructing different types of the longitudinal multi-focusing metalenses. The performances of the designed metalenses based on the different designed methods have also been analyzed and investigated in detail, and the intensity ratio of the focusing spots can be tuned easily by modulating the numbers of the relative type of nanoantennas, which is significant for the micro-manipulating optics and the multi-imaging technology in the integrated optics.
An ultra-thin, planar, broadband metalens composed of L–shaped gap antennas on a thin gold film has been designed, which is suitable for both circular and X/Y linear polarizations focusing simultaneously. The phase discontinuity of the cross-polarized transmisson light can be manipulated by the length and width of the L–shaped gap antenna accurately. The designed planar metalens posses a strong focusing ability over a large wavelength range, and the size of the focus spot is in sub-wavelength scale. The focal lengths change from 13 to 7 with incident wavelength from 750 to 1300 nm, and the cause of dispersion is explained and analyzed in detail. The designed metalens can work very well at a wide incident angles of 0~45°. Most importantly, its unique focusing ability that is independent of the incident polarizations will greatly promotes the practical applications and developments of the metasurfaces.
A strain force sensor based on fiber inline Fabry-Perot (FP) micro-cavity plugged by cantilever taper was proposed. The structure was fabricated by simple and cost-effective method only including fiber cleaving, tapering and splicing. The active-length of the FP micro-cavity reached 1360 µm, while the interference length was only 3.5 µm. Owing to the ultra-long active-length and ultra-short interference length, the strain force sensitivity of the fiber inline FP micro-cavity plugged by cantilever taper reached as high as 841.59 nm/N. Besides, the proposed structure showed good linearity (99.9%) in the sensing process and small temperature crosstalk (11 pm/ ̊C). It can be used as a practical and reliable strain force sensor.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
Vernier-effect has been widely employed in interferometer-based optical fiber sensors to improve the sensitivities greatly. However, the influence of the Vernier-effect on detection limit (DL) that is more important for evaluating the actual performance of the sensor has not been discussed. Two gas pressure fiber sensors (a typical Fabry-Perot interferometer-based sensor and a Vernier sensor) are used to compare the DL of them by experiments. Both the theoretical analysis and the experimental results show that, though the Vernier-effect magnifies the spectrum shift sensitivity, it also magnifies the value of the smallest detectable wavelength shift. As a result, the actual DL of the sensor is not improved by employing the Vernier-effect. If the contrast ratio of the Vernier envelope is not optimized enough for most of the reported sensors, the DL can even degenerate greatly.
An optical fiber strain sensor based on capillary-taper compensation structure was proposed. The theoretical simulation by using the finite element analysis method shows a matching condition between the capillary length and the interference-cavity length to achieve the zero temperature crosstalk. Meanwhile, the strain sensitivity can also be improved greatly at the matching condition. We then set up an insertion controller system with high accuracy to make sure the interference-cavity length can match the capillary length. Finally the fiber strain sensor with both ultra-low temperature-crosstalk (0.05 pm/°C) and ultra-high sensitivity (214.35 pm/με) was achieved, and the experimental results agreed well with the calculated results. The “ladder-mode” and repeatability experiments showed that the proposed sensor was actually with the ultra-low detection limit of 0.047 µɛ.