Currently, energy demand and environmental pollution have boosted the evolution of different environment friendly technologies for the development of clean and renewable energies. That is why scientific research allows us to demonstrate the use of solid state based devices implementing temperature changes by electric induction. Given the above, a combined thermic generation system is taken into consideration, consisting in an environmentally friendly thermoelectric generator and refrigerator, wich is fueled and controlled by an electric fluid. Therefore, this study gives an approch and mathematic demonstrations to the concepts of greater relevance about the thermoelectric device and the effects of greater incidence, responsible for giving advantageous characteristics to the implementation of Peltier cells as a basic device in a cooling system for smaller applications, maintaining an ecological system, clean and without detrimental effects to the ozone layer, since there is no C02 emissions into the atmosphere.
1 December 2018 in Case Studies in Construction Materials
In this paper, the data were simulated using the bond model, proposed in a previously published research article of the author, to predict the peak bond stress in self-compacting concrete (SCC). The parameters considered were the concrete compressive strength, the geometrical properties of the reinforcing bar, and the confining reinforcement. The data consisted of 500 simulations for various concrete grades (C12, C16, C20, C25, C30, C35, C40, C45, and C50) and reinforcing bar diameters (10, 12, 16, 20, and 25 mm). Exploratory data analysis (EDA) was conducted and descriptive statistics were used to analyse all the data and some subsets of interest. These data can be reused in a finite element analysis software to explicitly model the bond between SCC and reinforcing bars through point-to-point or surface-to-surface contact.