27 April 2020 in Journal of Peridynamics and Nonlocal Modeling
This paper explores the restrictions imposed by bond-based peridynamics, particularly with respect to plane strain and plane stress models. We begin with a review of the derivations in Gerstle et al. (2005) wherein for isotropic materials a Poisson’s ratio restriction of \(\frac {1}{4}\) for plane strain and \(\frac {1}{3}\) for plane stress is deduced. Next, we show Cauchy’s relations are an intrinsic limitation of bond-based peridynamics and specialize these restrictions to plane strain and plane stress models. This generalizes the results from Gerstle et al. (2005) and demonstrates that the Poisson’s ratio restrictions described in Gerstle et al. (2005) are merely a consequence of Cauchy’s relations for isotropic materials. We conclude with a discussion of the validity of peridynamic plane strain and plane stress models formulated from two-dimensional bond-based peridynamic models.
25 April 2022 in Construction and Building Materials
17 October 2016 in Archive for Rational Mechanics and Analysis
23 January 2024 in Journal of Peridynamics and Nonlocal Modeling
12 July 2022 in Journal of Peridynamics and Nonlocal Modeling
23 December 2022 in Scientific Reports
Rock, concrete, and other engineered materials are often composed of several minerals that change volumetrically in response to variations in the moisture content of the local environment. Such differential shrinkage is caused by varying shrinkage rates between mineral compositions during dehydration. Using both 3D X-ray imaging of geo-architected samples and peridynamic (PD) numerical simulations, we show that the spatial distribution of the clay affects the crack network geometry with distributed clay particles yielding the most complex crack networks and percent damage (99.56%), along with a 60% reduction in material strength. We also demonstrate that crack formation, growth, coalescence, and distribution during dehydration, are controlled by the differential shrinkage rates between a highly shrinkable clay and a homogeneous mortar matrix. Sensitivity tests performed with the PD models show a clay shrinkage parameter of 0.4 yields considerable damage, and reductions in the parameter can result in a significant reduction in fracturing and an increase in material strength. Additionally, isolated clay inclusions induced localized fracturing predominantly due to debonding between the clay and matrix. These insights indicate differential shrinkage is a source of potential failure in natural and engineered barriers used to sequester anthropogenic waste.