29 August 2017 in Journal of Fluid Mechanics
Thermoacoustic instability is the result of a positive coupling between the acoustic field in the duct and the heat release rate fluctuations from the flame. Recently, in several turbulent combustors, it has been observed that the onset of thermoacoustic instability is preceded by intermittent oscillations, which consist of bursts of periodic oscillations amidst regions of aperiodic oscillations. Quantitative analysis of the intermittency route to thermoacoustic instability has been performed hitherto using the pressure oscillations alone. We perform experiments on a laboratory-scale bluff-body-stabilized turbulent combustor with a backward-facing step at the inlet to obtain simultaneous data of acoustic pressure and heat release rate fluctuations. With this, we show that the onset of thermoacoustic instability is a phenomenon of mutual synchronization between the acoustic pressure and the heat release rate signals, thus emphasizing the importance of the coupling between these non-identical oscillators. We demonstrate that the stable operation corresponds to desynchronized aperiodic oscillations, which, with an increase in the mean velocity of the flow, transition to synchronized periodic oscillations. In between these states, there exists a state of intermittent phase synchronized oscillations, wherein the two oscillators are synchronized during the periodic epochs and desynchronized during the aperiodic epochs of their oscillations. Furthermore, we discover two different types of limit cycle oscillations in our system. We notice a significant increase in the linear correlation between the acoustic pressure and the heat release rate oscillations during the transition from a lower-amplitude limit cycle to a higher-amplitude limit cycle. Further, we present a phenomenological model that qualitatively captures all of the dynamical states of synchronization observed in the experiment. Our analysis shows that the times at which vortices that are shed from the inlet step reach the bluff body play a dominant role in determining the behaviour of the limit cycle oscillations.
14 November 2018 in Chaos: An Interdisciplinary Journal of Nonlinear Science
Thermoacoustic instability is a result of the positive feedback between the acoustic pressure and the unsteady heat release rate fluctuations in a combustor. We apply the framework of the synchronization theory to study the coupled behavior of these oscillations during the transition to thermoacoustic instability in a turbulent bluff-body stabilized gas-fired combustor. Furthermore, we characterize this complex behavior using recurrence plots and recurrence networks. We mainly found that the correlation of probability of recurrence ( ), the joint probability of recurrence ( ), the determinism ( ), and the recurrence rate ( ) of the joint recurrence matrix aid in detecting the synchronization transitions in this thermoacoustic system. We noticed that and can uncover the occurrence of phase synchronization state, whereas and can be used as indices to identify the occurrence of generalized synchronization (GS) state in the system. We applied measures derived from joint and cross recurrence networks and observed that the joint recurrence network measures, transitivity ratio, and joint transitivity are useful to detect GS. Furthermore, we use the directional property of the network measure, namely, cross transitivity to analyze the type of coupling existing between the acoustic field ( ) and the heat release rate ( ) fluctuations. We discover a possible asymmetric bidirectional coupling between and , wherein is observed to exert a stronger influence on than vice versa.
1 October 2019 in Chaos: An Interdisciplinary Journal of Nonlinear Science
Liquid rockets are prone to large amplitude oscillations, commonly referred to as thermoacoustic instability. This phenomenon causes unavoidable developmental setbacks and poses a stern challenge to accomplish the mission objectives. Thermoacoustic instability arises due to the nonlinear interaction between the acoustic and the reactive flow subsystems in the combustion chamber. In this paper, we adopt tools from dynamical systems and complex systems theory to understand the dynamical transitions from a state of stable operation to thermoacoustic instability in a self-excited model multielement liquid rocket combustor based on an oxidizer rich staged combustion cycle. We observe that this transition to thermoacoustic instability occurs through a sequence of bursts of large amplitude periodic oscillations. Furthermore, we show that the acoustic pressure oscillations in the combustor pertain to different dynamical states. In contrast to a simple limit cycle oscillation, we show that the system dynamics switches between period-3 and period-4 oscillations during the state of thermoacoustic instability. We show several measures based on recurrence quantification analysis and multifractal theory, which can diagnose the dynamical transitions occurring in the system. We find that these measures are more robust than the existing measures in distinguishing the dynamical state of a rocket engine. Furthermore, these measures can be used to validate models and computational fluid dynamics simulations, aiming to characterize the performance and stability of rockets.
17 February 2022 in Combustion and Flame
1 March 2018 in Chaos: An Interdisciplinary Journal of Nonlinear Science
We here systematically investigate amplitude death (AD) phenomenon in a thermoacoustic system using a mathematical model of coupled prototypical thermoacoustic oscillators, the horizontal Rijke tubes. AD has recently been identified as a relatively simple phenomenon, which can be exploited to stop the unwanted high amplitude pressure oscillations resulting from the occurrence of thermoacoustic instability. We examine the effect of time-delay and dissipative couplings on a system of two Rijke tubes when they are symmetrically and asymmetrically coupled. The regions where appropriate combinations of delay time, detuning, and the strengths of time-delay and dissipative coupling lead to AD are identified. The relative ease of attaining AD when both the couplings are applied simultaneously is inferred from the model. In the presence of strong enough coupling, AD is observed even when the oscillators of dissimilar amplitudes are coupled, while a significant reduction in the amplitudes of both the oscillators is observed when the coupling strength is not enough to attain AD.
1 September 2019 in Chaos: An Interdisciplinary Journal of Nonlinear Science
Oscillatory instabilities, although ubiquitous in nature, are undesirable in many situations such as biological systems, swaying of bridges and skyscrapers, aero-acoustic flutter, prey-predator and disease spread models, and thermoacoustic systems, where they exhibit large amplitude periodic oscillations. In the present study, we aim to study the suppression mechanism of such undesired oscillations in a pair of thermoacoustic oscillators, also known as horizontal Rijke tubes. These oscillators are coupled through a connecting tube whose length and diameter are varied as coupling parameters. With the variation of these parameters, we show the first experimental evidence of rich dynamical phenomena such as synchronization, amplitude death, and phase-flip bifurcation in coupled identical thermoacoustic oscillators. We discover that when frequency and amplitude mismatch are introduced between these oscillators, quenching of oscillations in one or both the oscillators occurs with further ease, through the mechanisms of amplitude death and partial amplitude death. Finally, we show that the effectiveness of coupling is sensitive to the dimensions of the connecting tube which can be directly correlated with the time delay and coupling strength of the system.