20 February 2025 in IEEE/ASME Transactions on Mechatronics
The robotics research community is placing a major focus on the automation of difficult operations like the production of wiring harnesses, which require a high degree of dexterity and precision. In current industrial production lines, this operation is still manually done since it requires manipulating deformable linear objects like cables and wires. Thanks to the advent of multimodal sensory systems, it is possible to develop robotic systems capable of autonomously executing such complex tasks or assisting human operators. This article introduces a robotized system for autonomous wiring harness assembly by leveraging cutting-edge actuation and sensor technologies. The system here proposed is composed of a robotic arm equipped with tactile and proximity sensors for wire positioning and routing, and another one with a taping gun to secure wires. Furthermore, an external depth camera is utilized for real-time verification of the assembly process. To control the robotic arms' movements, a modular control architecture has been developed, providing adaptability of the system to different product designs or operational conditions. Finally, experimental evaluation for each component of the system is also provided, showing the effectiveness of the proposed solution in a real industrial scenario.
1 January 2025 in IEEE Transactions on Automation Science and Engineering
1 October 2026 in IEEE/ASME Transactions on Mechatronics
Automating deformable linear object (DLO) manipulation is vital for advancing manufacturing in industries like automotive, aerospace, and electronics. Among these, connector assembly poses a significant challenge due to the inherent complexity of handling flexible objects and the demand for high precision. This article introduces a novel methodology for automating connector assembly using a robot equipped with a custom mechatronic tool. The system integrates a parallel-jaw gripper with sensorized fingers and a stereo camera setup to ensure accurate pin alignment and insertion. The stereo vision system estimates the pin’s full 6-D pose, while the sensorized fingers monitor the insertion process in real time, reducing failure risks and eliminating reliance on global force measurements. In addition, a pull test validates the assembly. Real-world experiments with two distinct connector assembly tasks demonstrate the proposed approach's effectiveness. The results underscore the system's potential to boost automation, improve assembly quality, and decrease reliance on manual labor in complex connector assembly operations.