When a mobile manipulator’s wheel loses contact with the ground, the manipulator may overturn, causing material damage, and in the worst case, putting human lives in danger. The overturning stability of wheeled mobile manipulators must not be overlooked at any stage of the mobile manipulator’s life, starting from the design phase, continuing through the commissioning period and extending to the operational phase. The various overturning stability criteria formulated throughout the years do not explicitly consider normal wheel loads, with most of them relying on the prescribed stability margins in terms of overturning moments. These formulations commonly consider the overturning moments regarding axes connecting the adjacent manipulator’s contact points with the ground and could be notably restrictive. Explicit expressions for the supporting forces of the manipulator provide the best insights into the relevant affecting terms that contribute to the overturning (in)stability. They also reduce the necessity for considering about which axis the manipulator could overturn and simultaneously enable the formulation of more intuitive stability margins and on- line overturning prevention techniques. The present study presents a general dynamics modelling approach in the Newton–Euler framework using 6D vectors and provides normal wheel load equations for a typical 4-wheeled rigid-chassis mobile manipulator traversing uneven terrain. The given expressions are expected to become the standard guidelines in considered wheeled mobile manipulators and to provide a basis for effective overturning stability criteria and overturning avoidance techniques. Based on the presented results, specific improvements of the state-of-the-art criteria are discussed.
In this paper a radiator heating system of a building is considered. For the purpose of the heating system optimization, a mathematical model of the system is developed. The linear quadratic algorithm with integral action is proposed and analyzed. This solution has proven to be expensive. Further analysis of the model is done and a reduction of the order of the system is proposed. An inverse-based controller design approach for minimum-phase first order system is used to provide realizable controller in the form of proportional integral controller. Optimal parameters of the control algorithm parameters have been chosen by integral of time absolute error criterion, and also by metaheuristic optimization. According to the real heating demand, a simulation of the plant is performed. Proposed controllers were tested by numerical simulation for a typical winter day for geographical region of the building. It is shown that advanced performance can be achieved with optimized control systems, and that by controller optimization a significant reduction of the energy consumption is obtained without losing the in-door comfort. This has also proved to be more economical solution.