For fast-moving event cameras, projection of events onto the image frame exhibits smearing of events analogous to high motion blur. For camera attitude estimation, this presents a causality dilemma where motion prior is required to unsmear events, but an image prior is required to estimate motion. This dilemma is typically circumvented by including an IMU to provide motion priors. However, IMUs limited dynamic range of ±2000 ○/s are shown to be insufficient for high angular rate rotorcrafts. Contrast Maximization is an event-only optimization framework that computes the optimal motion compensation parameter while generating an event image simultaneously. This paper analyses the performance of existing aggregation functions of the contrast maximization framework and proposes a non-convolution-based aggregation function that outperforms existing implementations. The use of discrete event images for optimizers is discussed, demonstrating alternate avenues of the framework to exploit. The effect of motion blur in motion-compensated images is defined and studied for Contrast Maximisation at high angular rates. Lastly, the framework is applied to rotation datasets with angular rates exceeding 2000 ○/s to demonstrate high angular rate motion estimation without motion priors.
22 August 2024 in IEEE Robotics and Automation Letters
This letter details the design and development of a novel 3D-printed, lightweight and rapid-curing automated payload installation system for aerial robots, using a 3D printed resin-filled adhesive carrier tile (ACT). Its structure is designed to fracture and disperse ultraviolet (UV) curable resin on impact, delivered with a lightweight spring-driven impactor that rams the tile against a target surface. The dispersed resin is then cured with UV light. Shear-testing experiments with 40 × 40 mm ACTs across common building materials, surface conditions and roughness demonstrate loading exceeding 900 N only after 10 seconds of curing, showcasing the strength, robustness and speed of the proposed system. Automated payload installation experiments show potential for applications requiring strong and permanent bonds to wall structures, such as sensor payloads or tether points within urban environments. To the authors' knowledge, this is the first work employing wet UV adhesives for payload installation via multirotors.