8 December 2009 in IEEE Transactions on Nuclear Science
A single-event model capable of capturing bias- dependent effects has been developed and integrated into the BSIM4 transistor model and a 90 nm CMOS process design kit. Simulation comparisons with mixed mode TCAD are presented.
21 November 2017 in IEEE Transactions on Nuclear Science
Angular single-event mechanisms and experimental upset data for 14/16nm bulk FinFET technologies are presented and analyzed. The discrete structure of FinFETs introduces unique geometrical and orientation dependences for angular single-event mechanisms and single-event upset responses of FinFET circuits. Geometric analyses and 3D technology computer-aided design (TCAD) results effectively explain the angular mechanisms behind experimentally observed singleevent cross section responses. Results show that angular singleevent upset cross section characteristics can be attributed to the proportional contributions of charge deposition regions in the fin structure and the sub-fin bulk substrate.
8 December 2009 in IEEE Transactions on Nuclear Science
Charge-collection circuits were designed and fabricated in a 90 nm bulk CMOS process to examine the effects of charge sharing in sub-100 nm bulk CMOS processes. Laser interrogation of the charge-collection circuits provide the first direct verification of sub-100 nm charge sharing effects and show the nodal spacing dependence of charge sharing. 3-D TCAD simulations corroborate the laser data and also show the use of guard-diodes as an effective charge sharing mitigation technique.
23 November 2011 in IEEE Transactions on Nuclear Science
Heavy-ion broadbeam results from a 90 nm process are presented for five inverter chains with varying n-well contact schemes. Results show that inverters with the smallest percentage of n-well contact area within an n-well produced the longest and most frequent single-event transients (SETs). As the percentage of n-well area contacted increases above 2%, the pulse width and number of SETs levels-off. A result indicating an optimized percentage of n-well area contacted can be calculated that minimizes the pulse width and number of SETs in a digital circuit.
18 November 2011 in IEEE Transactions on Nuclear Science
Process variations and charge sharing impact the single-event circuit response. This paper correlates parameter shift impact on the single-event upset (SEU) probability of flip-flop designs in advanced CMOS processes under the influence of charge sharing.
14 January 2021 in IEEE Transactions on Nuclear Science
Terrestrial neutron and alpha particle irradiation data for a 7-nm bulk FinFET technology reveal the persisting reliability threat single-event latchup (SEL) poses to advanced technology nodes. SEL is characterized over a wide range of supply voltages and temperatures for this technology node. SEL data is analyzed to determine the holding voltage ( V HOLD ) required to sustain SEL, which can be as low as 0.85 V at elevated temperatures. Such low SEL holding voltage within 100 mV of nominal supply voltage poses a major reliability threat.