We developed a microwave oscillator and a micro electromechanical systems-based rubidium cell for the miniaturization of atomic clocks. A thin-film bulk acoustic resonator (FBAR) having a resonant frequency of the fundamental mode in the 3.5 GHz band was employed instead of a crystal resonator. It delivers a clock transition frequency of Rb atoms of 3.417 GHz without the need for a complicated frequency multiplication using a phase-locked loop. This topology considerably reduces the system scale and power consumption. For downsizing the atomic clock system toward the chip level as well as mass production, a microfabricated gas cell containing Rb and N2 gases was also developed. These microcomponents were incorporated into an atomic clock test bench, resulting in a clock operation with a short-term frequency instability of 2.1 × 10−11 at 1 s. To the best of our knowledge, this is the first report of a coherent population trapping clock operation using an FBAR-based microwave oscillator as well as a microfabricated gas cell.
The miniaturization of optical systems is crucial for various applications, including compact augmented reality/virtual reality devices, microelectromechanical system sensors, ranging technologies, and microfabricated atomic clocks. However, reliance on bulky discrete optical elements has been a significant obstacle to achieving this miniaturization. This work introduces a highly efficient multifunctional metasurface (MFMS) that seamlessly integrates a lens, prism, and quarter-wave plate (QWP). This innovation allows simultaneous collimation, beam deflection, and polarization conversion within a singular thin element. Specifically, for the prism-QWP bifunctional integration, we achieved a high diffraction efficiency of 72.8% and a degree of circular polarization of −0.955 under exposure to linearly polarized light at a wavelength of 795 nm, proving its potential for ultracompact atomic clock applications. Moreover, the lens-prism-QWP trifunctional integration successfully showed diffraction-limited focusing performance with a numerical aperture of 0.4, which was sufficient to collimate a beam with a divergence angle of 20∘, corresponding to the light emitted from a standard vertical-cavity surface-emitting laser.
We developed microenergy harvesters using impact-induced oscillation to scavenge electrical power from low frequency (<;200 Hz) and random environmental vibrations. The microharvesters comprised a (K,Na)NbO 3 /Si composite cantilever and a cylindrical cavity to guide a metal ball to perpendicularly strike the cantilever. Through ball impact, oscillation of the cantilever was induced, generating electrical power at ambient vibration frequencies from 20 to 150 Hz. The contact time of ball impact was identified as a key parameter for power enhancement and was effectively tuned by adjusting the impact position on the triangular cantilever. The experimental output power when the impact position was at the base of the cantilever was 34.6 nW. This value is tenfold higher than that from conventional devices in which the ball strikes the tip of the cantilever.
In this study, we developed an energy harvester with a multibeam structure employing a (K,Na)NbO3(KNN) thin film. The harvester had a quatrefoil-shaped proof mass suspended by four KNN beams and was completely fabricated by micromachining technologies. The harvester was designed to obtain high nonlinearity. As a result, the fractional bandwidth of operable frequency was widened by more than 40% when the acceleration was 15 m/s2. The maximum harvested power of 640 nW was obtained at the resonant frequency of 1412 Hz.