This paper proposes a low complexity algorithm for calculating the soft decision metric of forward error correction codes. In order to reduce the complexity of LLR calculation, neural network training can be used to fit the relationship between input and output during exact LLR calculation. The trained network can skip the complex training process and directly estimate the LLR value. We use random signal-to-noise ratio (SNR) and received signals as the input layer of the neural network, and use the precisely calculated soft decision information as the output layer of the network. After training, the network can accurately estimate the LLR of the received symbols. The performance of 16QAM and 64QAM transmission system using the proposed algorithm and the exact LLR calculation algorithm in the AWGN channel with polar code as the encoding algorithm are presented, respectively. The simulation results show that the proposed algorithm has a similar bit error rate performance to traditional exact calculation algorithms, but with much lower complexity. The proposed algorithm can be applied in various decoding situations that require LLR calculation.
15 November 2024 in IEEE Transactions on Industrial Electronics
A long pulse high-g generation technology based on electromagnetic (EM) energy is proposed in this article, which uses an electromagnetic rotation-starting (EMRS) technology we pioneered. This technology enables translational objects start to rotate at high speed within a very short time. The centrifugal acceleration generated through this technology can simultaneously feature ultrahigh g values, rapid loading, and wide pulse width. We designed an analysis model based on the current filament method to study the EMRS technology and provided a control method for high-g output in this article. An experimental prototype was designed, and successful experiments were carried out to validate the feasibility of this technology. In the experiments, the acceleration reached 7.27 × 103 g from 0 g in 2.9 ms, and the acceleration above 6 × 103 g was maintained for 15.7 ms. Utilizing the technology proposed in this article is expected to get the acceleration above 2 × 104 g and meet the requirements of the research on the antilong-pulse high-g impact technology of projectile-borne devices in electromagnetic rail launch (EMRL) and other scientific research fields.
27 May 2026 in IEEE Transactions on Plasma Science
This article proposes an online prediction-based cooperative triggering strategy with dynamic adjustment to address the challenges of current waveform control in multi-module pulse power supply (PPS) systems. A nonlinear system model incorporating time-varying load impedance is established. This model enables the real-time prediction of current transients based on active current feedback and the dynamic adjustment of discharge timing for each pulse-forming unit (PFU). This approach achieves the precise synthesis of a flat-top current waveform under highly nonlinear and time-varying load conditions. Simulation results demonstrate that, compared to the offline iterative calculation method, the proposed method significantly reduces current ripple while maintaining a constant target muzzle velocity. Specifically, it reduces the peak overload by 12.6% and the peak jerk (the time derivative of acceleration) by 13.6%. Consequently, this study provides a practical and efficient solution for achieving high-precision, low-impulse control in modern PPS applications.
29 October 2026 in Journal of Circuits, Systems and Computers