28 August 2023 in npj Materials Degradation
We investigated the unique passive behaviour of Hybrid steel in de-aerated sulfuric acid and aqueous sodium chloride solutions through corrosion tests, surface analysis, and thermochemical modelling. Electrochemical measurements confirmed that Hybrid steel possesses stainless steel characteristics, including passivity, breakdown, and pitting, akin to low-alloyed stainless steel. Synchrotron hard X-ray photoelectron spectroscopy revealed a dynamically protective nanoscale passive film composed of Fe, Cr, Ni, and Al oxides, contributing to its stainless nature. The presence of Al and Ni enhances Cr’s role in forming a spontaneously passive and protective surface, resulting in exceptional corrosion resistance in acidic and chloride-containing solutions. Hybrid steel’s surface oxides remain robust even beyond the Cr(III)-to-Cr(VI) redox potential, distinguishing it from other stainless steels. This work demonstrates the potential for designing sustainable stainless steel with high-strength properties without requiring the conventional Cr threshold concentration of 10.5 per cent.
24 January 2026 in Materials Science and Engineering: A
5 May 2026 in Communications Materials
Hydrogen absorption in structural alloys can induce degradation through mechanisms that depend on its transport, distribution, and interaction with microstructure. Yet, these processes have been accessible only through indirect, bulk-averaged, or post-mortem measurements. Here, we present an operando high-energy X-ray diffraction microscopy approach that enables the quantification of hydrogen solubility and diffusivity from real-time lattice-strain evolution with micrometre-scale spatial resolution. The method, demonstrated on a double precipitation-hardened martensitic steel, provides spatiotemporal maps of hydrogen ingress across entire specimens, enabling simultaneous determination of local concentration and transport kinetics from a single experiment. Complementary electrochemical permeation measurements reveal analogous multi-stage transients, directly visualising the transition from lattice-fast to trap-controlled regimes and validating the diffraction-derived diffusivity hierarchy. The results show that hydrogen diffusivity is not a fixed material property but rather evolves during uptake. Precipitation-rich microstructures confine hydrogen near the surface, whereas precipitation-free martensite permits rapid penetration, establishing hydrogen transport as a state-dependent, time-variant process.
17 January 2023 in Research Square
We examined the unusual passive character of Hybrid steel in de-aerated sulfuric acid and aqueous sodium chloride solutions by benchmark corrosion and surface analytical tests in combination with CalPhaD-based thermochemical modelling. The electrochemical potentiodynamic polarization measurements have shown that Hybrid steel possesses all characteristic features of what makes steel stainless, such as passivity, breakdown and pitting, similar to standard low-alloyed stainless steel. Synchrotron hard X-ray photoelectron spectroscopy (HAXPES) analysis revealed that the stainless nature of Hybrid steel is achieved by a dynamically protective nanometre-sized passive film consisting of Fe, Cr, Ni, and Al oxides. The thermodynamic calculations showed that the surface oxide composition is Fe2O3•FeCr2O4•NiO•Al2O3, which changes structure, fraction and existence over electrochemical polarization. It has become understood that the presence of Al and Ni supports Cr in forming a spontaneously passive and hence protective surface, yielding exceptional corrosion resistance in acidic and chloride-containing aqueous solutions. The surface oxide could withstand breakdown and remain passive/repassivated even after transpassing the Cr(III)-to-Cr(VI) redox potential. While Cr is the prime passivating agent, an adverse effect of Cr was seen on grade 304 and 420 stainless steel when Cr(VI) species were released, savaging the passive film due to extensive interfacial pH reduction. However, among all tested stainless steels, Hybrid steel could repassivate due to the remaining and enriching Al and Ni oxides providing superior anodic passivation. Our work demonstrates that delicate alloying and microstructure engineering can design sustainable stainless steel with optimum high-strength properties without needing the well-known Cr threshold concentration of 10.5 per cent.
29 August 2026 in Materials Science and Engineering: A