Luís Garrido

Luís Garrido

Auto-generated profile, based on publicly available information

Luís Garrido

FEUP

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 July 2026 in U.Porto Journal of Engineering
Verified
Journal Article
Open access
JCJoao Castro
Joao Castro
João Rui Barros MatosJoão Rui Barros Matos
João Rui Barros Matos
Catarina CostaCatarina Costa
Catarina Costa
LGLuís Garrido
Luís Garrido
PLPedro Lopes
Pedro Lopes
FBFlávia Barbosa
Flávia Barbosa
Mechanical plug retention components are essential in industrial electrical connector testing, ensuring alignment and repeatability. This study evaluates a material–process substitution, comparing additively manufactured components produced by FDM in PLA and ASA with CNC machined POM components for five geometries used at PIBRA. The comparison considers production time, cost, dimensional accuracy, material consumption, material waste, functional performance, and human resource requirements. Results show that additive manufacturing reduces material consumption by 74%, material waste by 97%, and cost by 5%, while increasing production time by 186%. FDM parts demonstrated adequate qualitative fitting performance for the evaluated low-volume testing application. Overall, additive manufacturing is a viable solution for low-volume production, offering advantages in material efficiency and flexibility despite longer production times.

21 July 2026 in U.Porto Journal of Engineering
Verified
Journal Article
Open access
LGLuís Garrido
Luís Garrido
Catarina CostaCatarina Costa
Catarina Costa
JCJoão Castro
João Castro
João Rui Barros MatosJoão Rui Barros Matos
João Rui Barros Matos
HLHelena Lopes
Helena Lopes
FBFlávia Barbosa
Flávia Barbosa
Clamping plates are load-bearing insulating components that maintain winding compression and structural stability in three-phase power transformers. This study presents a topology-optimization-driven redesign of a transformer clamping plate for large-scale material extrusion additive manufacturing. A finite element model of the baseline C2R pressboard component was developed under representative assembly and operational loads and used as the reference for optimization. Candidate thermoplastics were screened based on dielectric performance, compatibility with mineral oil and ester, and tensile properties, leading to the selection of PEKK-C. Manufacturing-aware constraints, including overhang angle, minimum member size, symmetry, and preserved functional interfaces, were incorporated into the workflow. The optimized design achieved 33% volume and 10% mass reductions while satisfying the defined displacement and stress criteria. These results indicate improved material efficiency and design consolidation potential, although experimental validation remains necessary.

30 September 2026 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Verified
Journal Article
Closed access
João Rui Barros MatosJoão Rui Barros Matos
João Rui Barros Matos
JCJ. Castro
J. Castro
LGL. Garrido
L. Garrido
Catarina CostaCatarina Costa
Catarina Costa
CPC.S. Proença
C.S. Proença
DCD. Campos
D. Campos
Additive Manufacturing (AM) has emerged as a technology that allows the development of complex and customized components. Recently, its capabilities have been explored for the repair, remanufacturing, and functional upgrading of existing and ageing machinery. Beyond restoring damaged components, AM enables the redesign of conventional parts into lightweight, topology-optimized structures, allowing significant mass reduction while maintaining or even improving mechanical and functional performance. This provides an opportunity to extend the service life of existing machines and to enhance their overall performance. In the present context, AM was implemented to upgrade the A-axis support of a five-axis computer numerical control (CNC) waterjet-cutting machine, which provides the structural interface between the swivel head motor/gearbox and the abrasive waterjet tool. The current component is produced by welding and machining Al5083, and its mass adversely affects kinematic performance. This work presents an ongoing industrial case study aimed at introducing metal AM within the machine builder by redesigning the A-axis support for Wire Arc Additive Manufacturing (WAAM). A process development campaign was carried out on a robotic WAAM platform (using Fronius Cold Metal Transfer (CMT)) using SuperGlaze® 5183 Plus wire to identify stable deposition conditions with adequate geometric resolution and surface quality. The parameter study focused on deposition strategy, bead overlap, travel speed, torch inclination, and welding mode, using rapid screening based on bead geometry, dimensional fidelity, and visible defect formation. In parallel, a Topology Optimisation (TO) workflow was applied to minimise mass while limiting static nozzle-tip deflection under the waterjet reaction load and incorporating symmetry, keep-in regions, minimum member size, and WAAM overhang constraints. The optimized design achieved a 29% reduction in component mass while maintaining adequate structural performance under the evaluated static load cases. The WAAM process presented stable deposition conditions and established key manufacturability constraints, including a minimum feature thickness of 7 mm and a maximum self-supporting overhang angle of approximately 45°. Tomographic and corrosion analyses confirmed the importance of controlling process-induced porosity and interpass defects in WAAM-produced aluminium components. The results demonstrate the potential of combining topology optimisation and WAAM for lightweighting and upgrading industrial machine-tool components, while highlighting the need for further prototype validation and life-cycle assessment to quantify the resulting performance and environmental benefits.