In recent years, Aluminium Alloy 7075 plays a vital role in the manufacturing of aircraft wing and fuselage skin due to its light weight and specific strength characteristic behavior. The components like aircraft wing and fuselage skin faces serious erosion issues due to sand particles while high speed running conditions. This issue is focused into the present research and fabrication of AA7075 Surface Hybrid Composites (SHCs) with reinforcements like Aluminium Oxide (Al2O3) and silicon carbide (SiC) through the novel Friction stir Processing (FSP) technique is suggested. Microhardness tests are performed for different combinations of dual reinforcement and the erosion resistance is evaluated for the specimen with superior microhardness value. This research aims particularly on evaluating the erosion performance of the aforementioned hard specimen. Input erosion parameters like jet distance, jet pressure, jet angle, erodent impinging time and mesh number of erodent are considered and they are optimized through Taguchi technique. The obtained result undergoes Analysis of Variance (ANOVA) test and each parameter based percentage contribution is identified. The surface morphology analysis shows that grain refinement and homogenous distribution of reinforcement particles are at less surface degradation when compared to base AA7075.
4 March 2022 in Journal of Adhesion Science and Technology
Aluminum alloy-based surface composites processed by friction stir processing with enhanced hardness and impact energy is potentially suitable for aircraft and automotive applications. This behavior is improved by applying design of experiments (DOEs) in finding the suitable combination of process parameters. The influence of tool rotational speed, transverse speed, tilt angle, plunging depth and number of passes on hardness and impact energy are determined via Taguchi. It is identified that No. of pass plays a major contribution based on ANOVA. Single optimal parameter obtained through TOPSIS is employed to fabricate the composites with different volume ratios of WO3 and SiC particulates. Microstructural characterization of all the defect free surface composites depicts wide and homogenous dispersion of reinforcement particulates. Surface hybrid composite specimen comprising both WO3 and SiC particles significantly raises the microhardness to 214VHN attributed to the homogenous dispersion strengthening and grain boundary pinning mechanism. The specimen tends to show enhanced impact energy (12.3 J) due to extensive load bearing capacity of the reinforcements.