28 June 2024 in System research and information technologies
In order to assess the impact of each of the factors that affect the quality and uniformity of grinding coffee beans and to compare the impact of these factors, it is worth establishing a quantitative indicator of this impact. To solve this problem, dispersion analysis was used as a method of organizing sample data according to possible sources of dispersion. The chosen method made it possible to decompose the total dispersion into components caused by the influence of factor levels. Grinding time, geometric dimensions of the grain, moisture content of the grain, speed of rotation of the motor shaft were selected as factors influencing the homogeneity of grinding. The justification and assessment of the reliability of statistical conclusions about the informational significance of indicators affecting the homogeneity of coffee grinding was carried out to ensure the highest possible probability of the obtained result.
26 April 2024 in Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies
A variant of the construction of a control system for the technological process of the production of crab sticks to meet the needs of food industry enterprises specializing in the production of fish and seafood products is proposed. Crab sticks are a world-famous food product that is widely used both as a separate product and as a component of food dishes. In the beginning, crab sticks were made from the meat of "white fish", the so-called surimi. The main ingredient is minced meat from white ocean fish from the North Pacific Ocean. In order to get a taste similar to the original taste of crabs, food additives and additional ingredients are added to the sticks. The need to implement a control system is due to the fact that the automation of the crab sticks production process makes it possible to carefully follow the production technology and thus improve the quality of the final product. The task was solved by developing an information and measurement system to support the main technological parameters within the established limits of tolerance. The proposed system is able to receive information from the object of control thanks to the use of modern high-precision sensors. An additional advantage of the proposed system is the implementation of a situational system with fuzzy logic in it to determine the influence of the parameters of the technological process of making crab sticks on their quality. Fuzzy logic systems are becoming increasingly widespread in production along with the use of neural networks due to their practically limitless possibilities in solving the problems of control and management of processes and equipment. Computer modeling was conducted, which confirmed that the creation of a heuristic analyzer for determining the quality of crab sticks is appropriate and necessary in order to prevent the production of low-quality products. Implementation of the system makes it possible to avoid emergency situations in the technological process and ensure high quality of products. The structural diagram of the system is presented, its main elements are defined. An error analysis was carried out, which confirmed the necessary high accuracy of the proposed version of the construction of the control system.
21 July 2025 in Metrology and instruments
To control the technological process of butter production, it is advisable to use microprocessor measuring systems that are capable not only of receiving current values of control parameters, but also of timely establishing the moment of metrological failure of sensors and technological equipment. This allows to avoid the release of poor-quality products due to non-compliance with the conditions of production technology, as well as to predict the occurrence of emergency situations in production. The paper presents a microprocessor system that is capable of controlling the production technology at the main stages of milk quality control, milk cooling, milk separation, cream pasteurization, cooling to the temperature of physical maturation, cream whipping. Thanks to the implementation of the proposed system, the results of full-scale temperature measurements at the stage of «Cream Pasteurization» of the technological process of butter production were obtained. The equivalence of the results of series of observations was checked to verify the metrological reliability of the sensors used.
16 December 2025 in Metrology and instruments
To ensure control of technological process parameters in the dairy industry, it is necessary to use measuring systems that will make it possible to measure all the main technological parameters, accumulate statistical information, and analyze the data obtained in order to maintain high quality of the products being manufactured. The work has developed a structural diagram of a measuring system that is able to control the technology of hard cheese production at the main stages: «Milk storage and ripening», «Milk sterilization and cooling», «Cheese formation», «Cheese pressing», «Cheese transfer», «Cheese ripening». Thanks to the implementation of the developed measuring system, the results of temperature measurements at six stages of the technological process of hard cheese production were obtained. Thanks to the analysis of variance, the metrological reliability of temperature sensors was checked. An uncertainty budget was compiled and confidence intervals for random measurement error were established.
30 September 2026 in Innovative technologies and scientific solutions for industries
The subject of this study is the process of determining combinations of process parameter levels in pasta production that ensure the highest quality of the final product. The purpose of this article is to improve and study the information and measurement system (IMS) to enhance the quality of pasta production. This work involves the following tasks: analyzing the current state of the pasta industry; developing structural and electrical schematic diagrams of an improved IMS capable of influencing the technological process (TP); identifying the TP stage most critical for ensuring final product quality; performing statistical analysis of the indicators obtained at the specified TP stage; developing a fuzzy-logic heuristic system analyzer to determine the TP parameter levels that ensure the highest quality; constructing a mathematical model of the multifactorial effect on pasta dough quality; and providing quantitative evidence of the effectiveness of the proposed approach. Research Methods: functional decomposition for developing the IMS block diagram; tracing and bus organization for constructing the IMS electrical schematic; statistical analysis and three-factor analysis of variance (three-way ANOVA) of repeated measurements; a full 4×3×3 factorial experiment with four independent repeated measurements for each factor combination; and fuzzy logic for developing a heuristic analyzer of process parameter levels affecting pasta quality. Results achieved: the IMS was improved by adding actuators and heating and cooling systems; the full factorial experiment identified 85°C, 32.5% dough moisture content, and 40 kPa vacuum pressure as the best tested combination, yielding a quality index of 9.8 points; three-factor ANOVA confirmed statistically significant main effects of temperature, dough moisture content, and pressure, as well as a significant dough-moisture–pressure interaction and a significant three-way interaction; under the adopted comparative metric, the average integral relative error was 0.93% for the proposed IMS and 1.88% for the Siemens-based reference system. Conclusions. The proposed IMS enables control of key production-process sections and supports selection of technologically justified operating conditions. The fuzzy-logic analyzer and the multifactorial statistical model provide a basis for decision support in pasta dough preparation.
30 June 2026 in System research and information technologies
The solution of the scientific and practical problem of determining the effect of factor influence on the result of the work of the information measuring system for the technological process of manufacturing processed cheese is considered through the use of a factor influence model that takes into account the simultaneous effect of five factors and their cross-interactions on the control indicator. The task of the study is to implement for use a simplified cross-classification model that makes it possible to estimate the amount of expected information about the levels of the control parameter when taking into account the levels of both influencing factors and their mutual interactions. An electrical schematic diagram of the control system has been developed and its practical implementation has been carried out, thanks to which statistical data on the main parameters of the technological process have been obtained. Conclusions have been drawn about the possibility of further use of the proposed cross-classification model for various information measuring systems regardless of their purpose.