28 April 2016 in Journal of Esthetic and Restorative Dentistry
1 January 2013 in Dental Materials Journal
The purpose of this study was to evaluate the effect of polishing procedures on the color stability of different types of composites after aging. Forty disk-shaped specimens (Ø10×2 mm) were prepared for each composite resin type (an ormocer, a packable, a nanohybrid, and a microhybrid) for a total of 160 specimens. Each composite group was divided into four subgroups according to polishing method (n=10): control (no finishing and polishing), polishing disk, polishing wheel, and glaze material. Color parameters (L*, a*, and b*) and surface roughness were measured before and after accelerated aging. Of the polishing methods, glazed specimens showed the lowest color change (∆E*), ∆L*, and ∆b* values (p<0.05). Of the composite resins, the microhybrid composite showed the lowest ∆E* value, whereas the ormocer showed the highest (p<0.05). For all composite types, the surface roughness of their control groups decreased after aging (p<0.05). In conclusion, all composite resins showed color changes after accelerated aging, with the use of glaze material resulting in the lowest color change.
1 January 2015 in Dental Materials Journal
The purpose of this study was to investigate the effects of different finishing-polishing techniques on the color stability and surface roughness of various anterior restorative materials after staining. A composite, a compomer, and a resin-modified glass ionomer were used to prepare 120 specimens. Specimens were divided into subgroups: polishing discs, liquid polishing material, aluminium oxidebonded discs, and control. The specimens were stained in a coffee solution. Color parameters (L*a*b*) and surface roughness before and after staining were measured. The color was affected by the material type (p0.05). The finishing-polishing systems had an effect on color after storing in staining solution.
1 October 2013 in European Journal of Dentistry
Objective: This study aimed to evaluate the antimicrobial efficiency of PDT and the effect of different irradiation durations on the antimicrobial efficiency of PDT. Materials and Methods: Sixty freshly extracted human teeth with a single root were decoronated and distributed into five groups. The control group received no treatment. Group 1 was treated with a 5% sodium hypochlorite (NaOCl) solution. Groups 2, 3, and 4 were treated with methylene-blue photosensitizer and 660-nm diode laser irradiation for 1, 2, and 4 min, respectively. The root canals were instrumented and irrigated with NaOCl, ethylenediamine-tetraacetic acid, and a saline solution, followed by autoclaving. All the roots were inoculated with an Enterococcus faecalis suspension and brain heart infusion broth and stored for 21 days to allow biofilm formation. Microbiological data on microorganism load were collected before and after the disinfection procedures and analyzed with the Wilcoxon ranged test, the Kruskal-Wallis test, and the Dunn′s test. Results: The microorganism load in the control group increased. The lowest reduction in the microorganism load was observed in the 1-min irradiation group (Group 2 = 99.8%), which was very close to the results of the other experimental groups (99.9%). There were no significant differences among the groups. Conclusions: PDT is as effective as conventional 5% NaOCl irrigation with regard to antimicrobial efficiency against Enterococcus faecalis.
1 January 2021 in Imaging Science in Dentistry
Yaylacı A, et al. Imaging Sci Dent. 2021 Sep;51(3):261-269. https://doi.org/10.5624/isd.20200334
22 June 2020 in Journal of Esthetic and Restorative Dentistry