1 February 2014 in Computers in Industry
1 April 1998 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
The contact problem and stress state for indentation by a flat punch with rounded edges is studied. For the contact problem itself analytical solutions are obtained for both surface pressure and interior stress fields. Cases of normal indentation and frictional contact, the latter in both sliding or partial slip conditions, are all treated. The transition from the Hertzian configuration to the contact between a nominally flat pad and contacting flat surface is discussed, and it is found that the strength of the contact decays surprisingly slowly. Regarding the von Mises yield parameter, there is a range of configurations for which the strength is actually higher than the Hertzian one, and the strength decays only when the corner radii are very small. The present solution is therefore a realistic alternative to the classical rigid-flat punch idealization, and has particular application to fretting fatigue tests.
27 May 2013 in IEEE Transactions on Visualization and Computer Graphics
Efficient text visualization in head-worn augmented reality (AR) displays is critical because it is sensitive to display technology, text style and color, ambient illumination and so on. The main problem for the developer is to know the optimal text style for the specific display and for applications where color coding must be strictly followed because it is regulated by laws or internal practices. In this work, we experimented the effects on readability of two head-worn devices (optical and video see-through), two backgrounds (light and dark), five colors (white, black, red, green, and blue), and two text styles (plain text and billboarded text). Font type and size were kept constant. We measured the performance of 15 subjects by collecting about 5,000 measurements using a specific test application and followed by qualitative interviews. Readability turned out to be quicker on the optical see-through device. For the video see-through device, background affects readability only in case of text without billboard. Finally, our tests suggest that a good combination for indoor augmented reality applications, regardless of device and background, could be white text and blue billboard, while a mandatory color should be displayed as billboard with a white text message.
1 June 2015 in Computers in Industry
7 December 2000 in Journal of Tribology
The propensity toward thermoelastic instability (TEI) in multi-disk clutches and brakes is investigated by introducing a new bidimensional analytical model, where metal and friction disks are replaced by two-dimensional layers of finite thickness. This new model permits to estimate the effect of the thickness ratio a1/a2, between friction and metal disks, on the critical speed, critical wave parameter and migration speed of the sliding system. It is found that as the thickness ratio a1/a2 decreases the critical speed reduces significantly taking up values about 80 percent smaller than that predicted by previous two-dimensional models for commonly used ratios 0.1<a1/a2<1, whilst the critical wave parameter slightly increases. Therefore, not only the susceptibility towards TEI can be reduced by changing the material properties of the friction lining but also by adjusting suitably the thickness ratio of the disks. The two-dimensional model is also employed to determine the critical speed in a real multi-disk clutch, and the results are compared with a three-dimensional finite element code. It is shown that the critical speed estimated by the present two-dimensional plane strain model is in good agreement with that determined by the FE code for sufficiently large radial thickness of the disks, whilst the two-dimensional plane stress solution has to be used for relatively small radial thickness ratios. Also, it is found that the critical number of hot spots is independent of the radial thickness ratio and it is correctly predicted by the two-dimensional model.