1 March 2016 in Journal of Environmental Chemical Engineering
1 December 2014 in Chemosphere
24 August 2016 in Environmental Science & Technology
FFFabian Christoph Fischer
+1
In chronic toxicity tests with Caenorhabditis elegans, it is required to feed with bacteria, which reduce the freely dissolved concentration (Cfree) of hydrophobic organic chemicals (HOCs), leading to poorly defined exposure with conventional dosing procedures. We examined the efficacy of passive dosing of polycyclic aromatic hydrocarbons (PAHs) using silicone O-rings to control exposure during C. elegans toxicity testing, and compared the results to those obtained with solvent spiking. Solid-phase microextraction and liquid-liquid extraction were used to measure Cfree and the chemical dose taken up via ingestion. During toxicity testing, Cfree decreased by up to 89% after solvent spiking but remained constant with passive dosing. This led to a higher apparent toxicity on C. elegans exposed by passive dosing than by solvent spiking. With increasing bacterial cell densities, Cfree of solvent spiked PAHs decreased while maintained constant with passive dosing. This resulted in lower apparent toxicity under solvent spiking, but an increased apparent toxicity with passive dosing, probably as a result of the higher chemical uptake rate via food (CUfood). Our results demonstrate the utility of passive dosing to control Cfree in routine chronic toxicity testing of HOCs. Moreover, both chemical uptake from water or via food ingestion can be controlled, thus enabling to discriminate different uptake routes in chronic toxicity studies.
18 July 2016 in Environmental Science & Technology
With regard to a potential underestimation of bioconcentration factors (BCF) in flow-through fish tests, sorption of 11 highly hydrophobic organic chemicals (HOCs) (log KOW 5.5–7.8) from different substance classes was systematically investigated for the first time in the presence of fish feed (FF) and filter residues (FR), the organic matter (OM) most relevant for fish bioconcentration studies. Sorption was investigated in batch-equilibrium experiments by solid-phase microextraction (SPME) resulting in partitioning coefficients of solid–water (Kd), total organic carbon–water (KTOC), and dissolved organic carbon–water (KDOC). Results prove a high affinity of HOCs for FF and FR supporting a significant impact on BCF studies and differing from sorption to Aldrich-humic acid (AHA) utilized as reference sorbent. Sorption is influenced by interactions between HOCs and OM characteristics. For FF, KDOC values were higher than KTOC values. Results help to assess the relevance of interaction of HOCs from different substance classes with OM relevant for BCF studies.
1 October 2020 in Applied Catalysis B: Environment and Energy
23 December 2022 in Environmental Science and Pollution Research
Hexachlorobenzene (HCB), a representative of hydrophobic organic chemicals (HOC), belongs to the group of persistent organic pollutants (POPs) that can have harmful effects on humans and other biota. Sorption processes in soils and sediments largely determine the fate of HCB and the risks arising from the compound in the environment. In this context, especially HOC–organic matter interactions are intensively studied, whereas knowledge of HOC adsorption to mineral phases (e.g., clay minerals) is comparatively limited. In this work, we performed batch adsorption experiments of HCB on a set of twelve phyllosilicate mineral sorbents that comprised several smectites, kaolinite, hectorite, chlorite, vermiculite, and illite. The effect of charge and size of exchangeable cations on HCB adsorption was studied using the source clay montmorillonite STx-1b after treatment with nine types of alkali (M+: Li, K, Na, Rb, Cs) and alkaline earth metal cations (M2+: Mg, Ca, Sr, Ba). Molecular modeling simulations based on density functional theory (DFT) calculations to reveal the effect of different cations on the adsorption energy in a selected HCB-clay mineral system accompanied this study. Results for HCB adsorption to minerals showed a large variation of solid–liquid adsorption constants Kd over four orders of magnitude (log Kd 0.9–3.3). Experiments with cation-modified montmorillonite resulted in increasing HCB adsorption with decreasing hydrated radii of exchangeable cations (log Kd 1.3–3.8 for M+ and 1.3–1.4 for M2+). DFT calculations predicted (gas phase) adsorption energies (− 76 to − 24 kJ mol−1 for M+ and − 96 to − 71 kJ mol−1 for M2+) showing a good correlation with Kd values for M2+-modified montmorillonite, whereas a discrepancy was observed for M+-modified montmorillonite. Supported by further calculations, this indicated that the solvent effect plays a relevant role in the adsorption process. Our results provide insight into the influence of minerals on HOC adsorption using HCB as an example and support the relevance of minerals for the environmental fate of HOCs such as for long-term source/sink phenomena in soils and sediments.