Ecuador’s electrical distribution networks face operational constraints such as high technical losses, voltage deviations, and low reliability in the context of growing demand and increasing penetration of renewable energy sources. This study assesses the technical and economic feasibility of implementing a battery energy storage system with a nominal capacity of 1400 kWh and a discharge power of 30 kW in a distribution feeder, using electrical modeling in specialized software, power flow simulations under multiple loading conditions, and a multicriteria analysis that includes indicators such as Joule losses, voltage regulation, operational reliability, and economic metrics. The impact on critical parameters of a distribution system with 253 transformers is evaluated, considering international interconnection standards and real operational data. Results show that the optimal location of the storage system reduces total active losses from 412.6 to 361.4 kW, equivalent to a 12.4% reduction, increases the minimum voltage from 0.92 to 0.97 per unit, decreases energy not supplied by 18%, and yields a return on investment of 14.2% with a levelized cost of energy of 0.118 USD/kWh. Battery energy storage is therefore a viable solution to optimize feeder operation, simultaneously improving energy efficiency, voltage stability, and economic profitability.
2 January 2025 in Revista Científica Multidisciplinar G-NER@NDO
This project presents the design of an intelligent monitoring and automated control system with IoT to optimize climate and irrigation management in greenhouses. The system integrates temperature, humidity, light, CO2 and soil moisture sensors, processing the data through an ESP32 microcontroller. The user interface, implemented through the Blynk and ThingSpeak platforms, allows remote monitoring and manual or automatic control of the greenhouse. The system incorporates drip irrigation and misting, dynamically adjusting to soil and environmental conditions. Programming includes automatic and manual modes, with hysteresis and timer functions to optimize actuator operation. Economic analysis demonstrates the feasibility and cost-effectiveness of the system, with a positive return on investment in the short term. This low-cost solution, based on ESP32 technology, offers an affordable alternative for small farmers, improving resource efficiency and increasing agricultural productivity in controlled environments.
29 January 2025 in Boletín Científico Ideas y Voces
La investigación evalúa la rentabilidad económica de instalar un parque de generación de energía eléctrica mediante módulos fotovoltaicos para autoabastecer la demanda habitacional de la urbanización San Ignacio, Santo Domingo. Se investigaron las condiciones climáticas de la zona, obteniendo valores de irradiación y temperatura mediante tres fuentes de PVsyst, promediados para una entrada más real al software. Se diseñó el sistema fotovoltaico conectado a la red usando PVsyst, ingresando ángulos de inclinación óptimos para los paneles solares y la demanda eléctrica del conjunto. Se eligieron componentes del sistema y se obtuvo un resumen de la distribución de los paneles solares hacia el inversor hasta el punto de inyección de energía eléctrica. La evaluación económica del proyecto incluyó detalles de precios de componentes, costos de inversión inicial y mantenimiento por limpieza de los módulos FV. El proyecto es viable gracias a la energía excedente inyectada a la red eléctrica convencional, permitiendo la recuperación de la inversión a mediano plazo y generando ganancias monetariaspara el propietario. Se espera que este proyecto piloto fomente la implementación de sistemas de generación distribuida con energías renovables en urbanizaciones.
1 November 2025 in Sapiens International Multidisciplinary Journal
This study addresses energy challenges in the Ecuadorian context by integrating Distributed Generation (DG) and Smart Grids into a residential complex. The primary objective is to optimize the placement of renewable sources—solar and biomass—to enhance the efficiency, reliability, and sustainability of the local electrical system. Using DIgSILENT Power Factory software as a simulation platform, load patterns were analyzed, deficiencies of the existing system were diagnosed, and various DG configurations were evaluated. The results demonstrate that the strategic placement of renewable resources, supported by predictive algorithms, reduces energy losses, improves power supply quality, and increases the complex's energy autonomy. This proposal not only offers a technically and economically viable solution but also lays the foundation for a scalable model of urban energy management, aligned with the goals of energy transition and sustainability.
1 May 2025 in Sapiens International Multidisciplinary Journal
This study develops a technical-economic analysis for the implementation of a photovoltaic system at the Liceo de las Américas Private School. The research evaluates the feasibility of optimizing institutional energy consumption through the installation of solar panels, considering critical factors such as the solar radiation available in Santo Domingo de los Tsáchilas, the optimal sizing of the system and the projected return on investment. The work includes a detailed analysis of the electrical loads, design of the photovoltaic system and compliance with current regulations. The results demonstrate the technical and financial feasibility of the project, projecting significant benefits in terms of reduced operating costs and environmental sustainability.
Las redes eléctricas de baja tensión (BT) todavía se manejan con métodos tradicionales, lo que limita la visibilidad de los flujos de potencia y tensión, así como el entendimiento de la conectividad y la automatización de las operaciones. En este contexto, el proyecto UPGRID presenta una propuesta abierta y completa que busca modernizar la distribución eléctrica, generando beneficios operativos y nuevas oportunidades de negocio para todos los actores del sector, incluidos los consumidores finales. Su meta es dotar al sistema eléctrico de productos y servicios innovadores que optimicen la gestión de la red, reduzcan los tiempos de restauración del suministro y ofrezcan información precisa en tiempo real, facilitando además la participación activa en el mercado energético. Basado en la iniciativa InovGrid, el proyecto se estructura en tres pilares: medición inteligente, redes inteligentes enfocadas en la eficiencia y la confiabilidad, y microgeneración, incorporando tecnologías existentes para fortalecer la monitorización, el control y la seguridad.