1 January 2024 in Journal of Lightwave Technology
Recently, neural networks have gained prominence as potent tools in the realm of channel modeling in optical wireless communication (OWC) systems. However, existing channel networks tend to ignore random intensity noise and phase noise induced by optical sources under spontaneous and excited radiation, and likewise the shot noise of the devices. They could only characterize deterministic noise such as inter-symbol interference (ISI), signal-to-signal beat interference (SSBI), and nonlinearities. In this paper, a novel channel simulator framework to optical wireless communication systems is proposed, which can jointly learn the deterministic noise and random noise of the real channel simultaneously. The proposed approach is a comprehensive noise joint channel estimator (CNJCE) architecture. A comprehensive comparison is carried out in both simulations, free space optical (FSO) experiments and underwater visible light communication (UVLC) experiments, including three classical deep learning algorithms, two tributaries heterogeneous neural network (TTHnet) with posteriori additive white Gaussian noise (AWGN), white Gaussian noise layer-based channel estimator (WGNCE) and conditional generative adversarial network (CGAN) based channel model. In order to represent both deterministic noise and random noise modeling capabilities, an overall estimation score is also proposed, based on frequency mismatch and random noise distribution error. The final experimental results show that CNJCE achieved the highest average estimation scores of 79.86 and 97.52 in real FSO and UVLC channels respectively. In contrast, TTHnet without AWGN or WGNCE only achieved 39.83 and 43.82. And CGAN based channel model completely lost signal characteristics, far worse than CNJCE. Through comparison of various performance, CNJCE demonstrates commendable capabilities in generalization and robustness, concurrently achieving optimal performance in channel modeling. To the best of our knowledge, this is the first time that deterministic and random noise have been fully modeled in optical wireless communication modeling. Its applicability is showcased through successful deployment in real FSO and UVLC systems, thus establishing a foundational framework for comprehensive end-to-end learning paradigms.
8 April 2025 in Journal of Lightwave Technology
The low-earth-orbit (LEO) satellite communication has been proposed to support the next generation 6G space-airground integrated network owing to its large coverage area and seamless connectivity. To overcome the challenge of long-distance transmission for the free space optical (FSO) links, satellite communication systems often rely on high power transmissions to achieve high signal-to-noise ratios (SNRs) and high throughput, albeit at the expense of increased nonlinearity. In this paper, we propose a Q-learning inspired geometric shaping (QLI-GS) optimization scheme for amplitude phase shift keying (APSK) constellation to mitigate nonlinear effects and maximize the transmission distance. A pairwise optimization (PO) algorithm inspired by Q-learning is employed to achieve QLI-GS optimization for the APSK constellation according to an enhanced nonlinear interference noise model (ENINM) with effective memory mechanism, which ensures fast convergence and suppresses nonlinear impairments. Our results show the iteration time of the QLI-GS-APSK is reduced by approximately 99.89% compared to the generalized mutual information (GMI) maximized GS algorithm, and it also offers greater nonlinear tolerance than normally multi-ring APSK and traditional POAPSK. By leveraging a fiber-optical sampled bidirectional dualterminal FSO equivalent link, the QLI-GS-32APSK can experimentally achieve a data rate of 100 Gbit/s over a 230 km distance based on a single-wavelength system. A maximum distance of 580 km at a data rate of 60 Gbit/s using QLI-GS8APSK has been successfully demonstrated under 7% hard decision-forward error correction (HD-FEC) threshold of 3.8e-3, with a corresponding link budget of 62 dB. Additionally, the robustness of QLI-GS optimization under different atmospheric turbulence conditions has been further validated. We demonstrate single carrier 100Gbit/s QLI-GS-32APSK rate transmission over a 4.6 km outdoor FSO link with an Fried's coherence length of 11 cm, achieving 0.9 dB shaping gain over 32APSK. The results highlight the promising potential of the proposed QLI-GS-APSK scheme in addressing nonlinear challenges in satellite communications.
20 August 2024 in Journal of Lightwave Technology
Fronthaul solutions based on optical wireless communication (OWC) have emerged as a promising technology for 6G communications. OWC systems offer advantages such as flexible deployment and low construction costs, but face significant challenges due to severe signal-signal beat interference (SSBI), nonlinear distortions and atmospheric turbulence. Efficiently optimizing these joint impairments is particularly crucial for large-scale deployment. Additionally, various mobile network architectures typically have distinct fronthaul requirements, and different applications may necessitate a certain level of isolation. In this paper, we propose a multi-band adaptive optimization autoencoder framework (MBAE) to achieve end-to-end (E2E) optimization for OWC-based fronthaul systems supporting multi-access architecture. The impairments from the multiple transceiver systems and the propagation link can be jointly optimized to achieve performance closest to the global optimum. Studies are conducted in a simulated channel and a real optical wireless communication system respectively to verify the feasibility of the proposed channel model and MBAE. Simulation results show that MBAE can obtain an average Q factor gain of 3 dB compared with the multi-band carrier-less amplitude and phase (CAP) modulation with neural network based post-equalization (NN) and decision feedback equalization (DFE). The experimental results show that MBAE can achieve a 1.9 dB received optical power (ROP) sensitivity gain compared with CAP using NN and DFE at a transmission rate of 36 Gbps under the 7% hard decision-forward error correction (HD-FEC) threshold of 3.8×10-3 utilizing a low-cost PD with 10G-class bandwidth and support a link budget of 44.7 dB. In the performance test under turbulent conditions, MBAE also exhibits superior average performance, achieving a mean Q factor gain of 1.41 dB compared with CAP using NN and DFE. The proposed method can be a promising solution to meet the high-speed and low-cost requirements of future optical wireless fronthaul systems.
9 June 2025 in Journal of Lightwave Technology
The explosive growth of data traffic in the rapidly evolving intelligent era presents a significant challenge to information transmission within data centers (DCs). Visible light laser communication (VLLC) emerges as a promising optical interconnection solution due to its advantages of high capacity, low latency, and low energy consumption. However, existing VLLC-based optical interconnection architectures primarily rely on fixed, point-to-point links, lacking flexibility and programmability. To address this issue, this paper proposes and experimentally validates a flexible, high-capacity VLLC system enabled by programmable visible light optical switching. We introduce a Physics-inspired Forward-Backward Two-stage Network (PFBTNet) to achieve efficient optical field pre-manipulation in wavelength-division multiplexing (WDM) systems, enabling flexible and programmable visible light optical switching without additional post-processing. Experimental results demonstrate successful programmable WDM visible light switching ranging from 1 × 1 to 1 × 16 across a 4 × 4 receiver array, achieving a unicast switching efficiency of up to 0.99 and an average multicast efficiency exceeding 0.9. Furthermore, we experimentally demonstrate the average data transmission rates of 14.37 Gbps, 14.33 Gbps, and 10.63 Gbps for RGB 3-λ 16-channel optical interconnection by integrating external modulation and the bit-power-loading discrete multi-tone (DMT) modulation scheme. The maximum system throughput is projected to reach 629.28 Gbps, offering a promising solution for achieving flexible and ultra-high-speed VLLC-based optical interconnections in data centers.