LoRaWAN is a leading LPWAN technology for Internet of Things applications, known for its long-range communication and low-power consumption. Its ADR mechanism optimizes performance by adjusting transmission parameters, such as spreading factor and transmission power, based on network conditions. However, ADR faces significant limitations in environments with mobile end devices, where fluctuating signal quality leads to increased packet loss, inefficient energy usage, and reduced communication reliability. To address these challenges, PF-ADR, an alternative ADR scheme, is proposed for LoRaWAN networks with mobile devices. PF-ADR employs a particle filter to estimate a representative SNR value, maintaining multiple hypotheses of the communication channel state to enable more precise parameter adjustments. Simulations conducted under various scalability conditions reveal that PF-ADR achieves up to 29.5% higher packet delivery ratio compared to M-ADR, and 52.17% more than the standard ADR, while demonstrating a 43.19% improvement in energy efficiency over MB-ADR. Additionally, the algorithm reduces packet loss due to signal degradation while maintaining scalable performance in large networks. These results highlight the potential of PF-ADR to enhance communication reliability and energy efficiency in dynamic mobile environments.
27 January 2025 in Journal of Internet Services and Applications
Long Range Wide-Area Network (LoRaWAN) is a prominent IoT technology, and one of its operational parameters that significantly influences reliable transmission and packet delivery delay is Spreading Factor (SF). In this context, this paper develops a Spreading Factor Allocation scheme, named Delay and Reliability-aware Spreading Factor Allocation (DR-SFA), and evaluates it through simulations in comparison with four related solutions: Initial Spreading Factor Allocation (I-SFA), Adaptive Data Rate (ADR), I-SFA+ADR, and Collision-Aware Adaptive Data Rate (CA-ADR). The simulated scenarios model an Advanced Metering Infrastructure (AMI) executing Interval Meter Reading (IMR) and Power-Control Command (PCC) applications, with 200 to 1000 Smart Meters (SMs) distributed across an area of 56.25 km2. The results demonstrate that DR-SFA outperforms the alternative solutions by reducing the number of required Data Aggregation Points (DAPs) by up to 92.86%, while meeting the reliability and maximum delay requirements of the tested applications. Furthermore, DR-SFA successfully receives packets from meters located up to 2197.56 meters away in the scenario with 200 SMs, and achieves a Packet Delivery Ratio (PDR) of 99.49%, while also decreasing packet loss due to interference by 83.84% compared to ADR, and packet loss due to under sensitivity by 53.96% compared to I-SFA+ADR, in the scenario with 1000 SMs.
Electric grids have been restructured with Smart Grids (SGs) and the deployment of Advanced Metering Infrastructure (AMI) systems is a fundamental part of this process. The definition of the number of Data Aggregation Points (DAPs) and their installation positions is essential for the operation of an AMI, and this work proposes a method to minimize the number of DAPs to be deployed in a Long Range Wide-Area Network (LoRaWAN) network. The method is evaluated through simulations with up to 1000 Smart Meters (SMs) and compares the performance of the clustering algorithms K-Means, K-Medoids, and Fuzzy C-Means in the placement of DAPs. Furthermore, network transmission capacity is analyzed applying the Spreading Factor (SF) allocation schemes Highest - Spreading Factor Allocation (H-SFA), Closest - Spreading Factor Allocation (C-SFA), and Capture Effect - Spreading Factor Allocation (CE-SFA). The results demonstrate that the method is promising, the Fuzzy C-Means algorithm reduces the number of DAPs by up to 33.33%, and the CE-SFA scheme increases network energy efficiency by up to 228.41 b/J.
The Internet of Things has revolutionized device interconnectivity, with Low Power Wide Area Networks (LPWAN) enabling long-range communication with minimal energy consumption. Within this context, LoRaWAN is widely recognized as an efficient and robust technology for LPWAN networks. However, strategic gateway deployment remains a challenging for optimizing network performance. In this way, this paper issue proposes LoRaWISEP+, an enhanced version of the LoRaWISEP system, consisting of a comprehensive tool designed to improve the deployment process of LoRaWAN gateways. This solution incorporates additional clustering algorithms, such as K-Medoids (KMD) and Fuzzy C-Means (FCM), and a redesigned userfriendly interface, facilitating optimal placement of gateways and improving overall network coverage and reliability. In order to validate the new features of the proposed tool, a thorough evaluation was conducted using real-world deployment scenarios. Results demonstrate that different clustering algorithms exhibit strengths in specific characteristics, such as FCM being more suitable for lower energy consumption and K-Means (KM) being more suitable for higher transmission rates. This makes LoRAWISEP+ an enabling tool for optimizing network planning according to the most beneficial characteristic for the user.
9 January 2026 in Journal of Internet Services and Applications
Smart infrastructures increasingly rely on mobile IoT applications, such as fleet tracking and asset monitoring, which require robust long-range connectivity. Although LoRaWAN is a prominent technology in this context, its standard Adaptive Data Rate mechanism suffers significant performance degradation in dynamic scenarios due to delayed and outdated channel estimation. To address this limitation, this work proposes LoRa-LQE, a link quality estimation scheme specifically designed for mobile environments. By jointly leveraging SNR history and channel stability indicators, the proposed heuristic optimizes the allocation of Spreading Factor and Transmission Power on a per-device basis. Extensive simulations conducted in NS-3 evaluate the approach under varying node densities and mobility profiles. Across the evaluated scenarios, the results show that LoRa-LQE outperforms state-of-the-art solutions, achieving packet delivery ratio improvements of up to 12.1% and energy efficiency improvements of up to 46.6% compared to Mobile ADR, the second-best mobility-aware scheme considered, thereby enabling more reliable communication for mobile IoT assets.