21 May 2020 in Dorogi i Mosti
14 December 2023 in Dorogi i Mosti
Introduction. Asphalt mixtures are one of the most widely used materials in road construction. For the production of these mixtures, mainly conditioned mineral materials are used – coarse aggregate, fine aggregate and filler, and bitumen is used as a binder. Mineral filer is an important component of the asphalt mixture, which plays a major role in ensuring the quality of asphalt mixtures. The specific surface area of mineral filler is about 90 % of the specific surface area of mineral materials in the asphalt mix. Mineral filler plays two roles in the asphalt mixture: it fills the pores between fine and coarse aggregates and structures the bitumen.
1 October 2021 in Dorogi i Mosti
25 April 2023 in Dorogi i Mosti
1 October 2021 in Dorogi i Mosti
Introduction. Mineral powder is an important structural component of asphalt concrete. Mineral powder is the output material obtained after crushing of rocks or powdery remains of the industry. It is made by grinding the following hard rocks: dolomitized limestone, dolomite, limestone. Non-carbonate raw materials and industrial wastes are also used as raw materials. Problem statement. Road construction with the arrangement of asphalt concrete pavements requires a number of components of these mixtures. Due to this, the need in scarce carbonate mineral powders is growing. Therefore, it is advisable to consider researches directed on studying a number of by-products of industry in order to use them as a mineral powder of asphalt concrete. Purpose. To analyze the existing experience of using industrial waste as a mineral powder in production of asphalt concrete mixture for further introduction and improvement of environmental safety and operational characteristics of pavement due to new road construction materials. Materials and methods. Analysis of information sources and experience in the use of industrial waste as a mineral powder and study of requirements for materials and their composition. Results. An analytical review of the experience of using industrial waste as a mineral powder was performed. Various materials have been studied and analyzed, requirements for materials, their particle size distribution, content in asphalt concrete mixture had been established. Conclusions. Analysis of information sources regarding use of industrial waste as a raw material for the production of mineral powder had determined that they are used in the whole volume in different countries and in most cases in road construction. It had been found that the use of various wastes during road construction is a viable option that needs further study.
25 April 2023 in Dorogi i Mosti
Introduction. Asphalt mixtures are the most widely used road construction material for the arrangement of the top layers of road pavement. Asphalt mixtures are also used to arrange airfield runways, bridges deck surfacing, streets, pedestrian and cycle paths, etc. There is a large number of asphalt mixtures types that differ by grading, the largest nominal aggregate size, crushed stone content, crushed and uncrushed sand content, quality of components, and viscosity of the bitumen binder. Problem statement. The national method for asphalt mixture design is very similar to the Marshall method and the Superpave method in terms of determining the optimal bitumen binder content by the bulk properties of asphalt concrete. The only difference is that, according to the Marshall and Superpave methods, the optimal bitumen content is the one with an air pore content of 4.0 %. However, in accordance with the national method, the design air pore content varies depending on the type of asphalt mixture. A significant innovation of the Superpave method is the determination of asphalt performance indicators, such as rutting resistance, crack resistance, and resistance of the material to fatigue cracking. Apparently, these methods should also be implemented in Ukraine over time. Purpose. Analysis of the methods for asphalt mixtures design. Materials and methods. Analysis of literature sources on various methods of asphalt mixtures design. Results. The analysis of literary sources on different methods of asphalt mixtures design was carried out. Conclusions. The use of different methods of asphalt mixtures compaction can lead to the production of asphalt concrete with different volumetric properties, which will affect both the optimal bitumen content and the performance of asphalt concrete, thus further research should be aimed at defining the effect of the compaction method on the volumetric properties of asphalt concrete and their relationship with the production compaction of asphalt mixtures.