Geoffrey M. Rowe

Geoffrey M. Rowe

Auto-generated profile, based on publicly available information

Geoffrey M. Rowe

Abatech Inc

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2014 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
GRG. M. Rowe
G. M. Rowe
GKG. King
G. King
MAM. Anderson
M. Anderson
It is well known that asphalt rheology affects the cracking performance of asphalt binders. For many years researchers have struggled to develop tests that adequately deal with this aspect of pavement performance in a manner that can be incorporated rapidly into a specification. The use of the fatigue parameter developed during the Strategic Highway Research Program (SHRP), G*sin δ, has been shown to be a poor surrogate for cracking performance. Other tests, such as the direct tension test, used for cold-temperature cracking, also have been implemented poorly into specifications. However, use of the bending beam rheometer as an indicator of cold-temperature cracking has been widely adopted. As a result, a pavement stiffness of 300 MPa has been regarded as a reasonable parameter for cold-temperature cracking performance. The interrelationship between cold-temperature cracking parameters and those selected for fatigue cracking is not well understood. The onset of brittle behavior that occurs around 300 MPa stiffness and the selection of a fatigue parameter G*sin δ at 5 MPa are not wildly divergent in concept. More recently, the Glover–Rowe parameter has been revealed as a good indicator of cracking performance. In this paper we explore those differences that have occurred and make suggestions for the use of alternate parameters to better define the rheology of the binder as it relates to cracking.

1 January 2011 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
GRGeoffrey M. Rowe
Geoffrey M. Rowe
MSM. J. Sharrock
M. J. Sharrock
Traditionally, various forms of shift factors such as Arrhenius, Williams–Landel–Ferry (WLF), and polynomials have been used with asphalt materials. Shift factors have also been estimated with binder viscosity parameters. Successful extrapolation of viscoelastic functions requires a robust form of shift factor–temperature relationship. This form is important for performing calculations at the extremes of temperature found in practice. A preliminary analysis of complex modulus E* data of mixtures obtained from the Mechanistic–Empirical Pavement Design Guide (MEPDG) database demonstrated that the Kaelble form of shift factor could describe the functional form of the shift factor more accurately than the Arrhenius, WLF, or polynomial-fitting functions. However, the Kaelble shift function as originally described uses the same temperature as a reference temperature and as an inflection temperature. This factor creates a problem when attempts are made to implement the function in a design method or when materials are compared at a given temperature. Since 2008, additional work has investigated the use of this shift function to describe the properties of asphalt materials, particularly mixes and materials that require a wide range of property description (both above and below the glass transition or some other defining point). A modified form of the Kaelble function has been implemented in analysis software and thus makes multiple calculations more rapid. Additional analysis working with MEPDG E* database materials has shown that shifting works best with the Kaelble modification of the WLF equation. The same method has been applied to other asphalt materials.

19 January 2017 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
DCDonald W. Christensen
Donald W. Christensen
DADavid A. Anderson
David A. Anderson
GRGeoffrey M. Rowe
Geoffrey M. Rowe
The development of the well-known Christensen–Anderson (CA) rheological model grew out of attempts to model the relaxation spectra of asphalt binders using a skewed logistic distribution function. For this reason, there exist very strong relationships between the CA model parameters and the characteristics of relaxation spectra for asphalt binders. This paper presents a recently developed equation that allows direct and accurate calculation of the relaxation spectra from CA model parameters, demonstrating the nature of this relationship. Of the CA model/spectrum parameters, the most important in terms of describing overall behaviour and potential performance is the R-value, which describes the shape and skewness of the spectrum. This parameter and other similar rheological parameters have been linked to various important aspects of asphalt binder behaviour, including fatigue resistance, chemical composition and degree of oxidative ageing. This makes the parameter R a potentially useful parameter for inclusion in asphalt binder specifications, although care must be taken in how it is determined to ensure that it is accurate, repeatable and reflects the performance characteristics of interest.

20 August 2015 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
DMDavid J. Mensching
David J. Mensching
GRGeoffrey M. Rowe
Geoffrey M. Rowe
JDJo Sias Daniel
Jo Sias Daniel
TBThomas Bennert
Thomas Bennert

22 December 2016 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
DMDavid J. Mensching
David J. Mensching
GRGeoffrey M. Rowe
Geoffrey M. Rowe
JDJo Sias Daniel
Jo Sias Daniel
Low-temperature cracking is a critical distress form and is heavily influenced by the relaxation and strength capabilities of the material. These properties are related to the stiffness through principles of viscoelasticity. Recently, there is elevated pressure on decisions made by pavement and materials engineers to produce the longest lasting, most resourceful pavement systems possible to optimise monetary and non-renewable resource usage. The primary objectives of this study are to: (1) assess the value of a parameter which can describe low-temperature cracking resistance by using dynamic modulus (|E*|) and phase angle (δ) of the mixture and laboratory-measured performance; (2) present shape parameters of a mixture master curve that are directly related to the relaxation spectra, which is expected to play a pivotal role in low-temperature distress resistance with ageing; (3) define failure lines in Black Space which correspond with laboratory-measured performance and operate under a well-understood basis reinforced by the literature; and (4) provide agencies with a tool to aid in the movement towards a performance-based mixture design, acceptance, or rehabilitation decision-making system. An analysis of the mixture master curve is done to establish parameters which describe the relaxation spectra and ageing potential of materials. A mixture-based Black Space parameter is presented based on results from the |E*| master curve construction and the thermal stress restrained specimen test. This approach holds promise, but must be calibrated with a robust database before serious implementation considerations are made. Future work will look to determine a common stiffness condition to better define the failure threshold and to identify possible alternatives to the modified Glover–Rowe function used in this study. Further evaluation is also needed to optimise the temperature–frequency combination of the Black Space parameter itself and ensure a condition is specified that can be captured by test equipment an owner agency or contractor may possess as part of a performance-based specification framework.

1 January 2013 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
JSJorge B. Sousa
Jorge B. Sousa
AVAndrey Vorobiev
Andrey Vorobiev
GRGeoffrey M. Rowe
Geoffrey M. Rowe
IIIlan Ishai
Ilan Ishai
Traditionally, asphalt rubber (AR) mixtures have been difficult to produce. Their production requires specialized plants and equipment, which has resulted in their high cost to manufacture. In part this difficulty is due to the need to produce AR binder by blending it at high temperatures for a significant period of time (typically at about 190°C for 45 min to 1 h). The complexities in the process have caused AR mixes to be significantly more expensive to produce than conventional paving mixtures. A new technology that produces a reacted and activated rubber (RAR), which is an elastomeric asphalt extender, has been developed by hot blending and activation of a rubber granulate with a selected asphalt binder and activated mineral binder stabilizer. RAR achieves results comparable to those of other types of polymer modified binders (PMBs). However, a principal advantage of RAR is that it can be added easily to any hot-mix asphalt manufacturing facility with systems designed to feed particulate material into a batch plant (pugmill) or drum mix plant. This paper describes how RAR is produced from raw constituent materials. Various binder tests contrast performance with typical paving grades and PMBs used in the United States. The implementation of RAR in various types of asphalt mixtures is discussed, and demonstrative examples of test results are provided. Tests on mixtures in wheel tracking and fatigue demonstrate how the binder performance tests translate into mixture performance. In all cases evaluated, the RAR mixtures outperformed nonmodified and even conventional rubber modified equivalent materials.