14 June 2017 in IEEE Microwave and Wireless Components Letters
This letter demonstrates the dual transmission zeros (TZs) of bandpass elliptic prototype filters that can be directly implemented with two resonators in microstrip. An experimental filter based on the proposed alternate circuits is designed and fabricated. In order to improve the rejection of stopband, two additional TZs are introduced to the proposed filter. By means of directly implementing an elliptic bandpass filter in microstrip, the insertion loss of the presented filter can be less than 0.8 dB, and the Δf 3 dB /Δf 20 dB result is better than 0.583, which means the proposed filter has a good selectivity.
15 March 2019 in IET Microwaves, Antennas & Propagation
A broadband dual‐polarised antenna with wideband decoupling structure is presented. By using the improved dipole, the proposed antenna achieves a common impedance bandwidth of 62% ranging from 1.645 to 3.13 GHz with standing a wave ratio 90.9%) and high cross polarisation discrimination. It is very suitable for polarisation diversity wireless communication application.
14 March 2019 in International Journal of RF and Microwave Computer-Aided Engineering
In this article, a compact electromagnetic band‐gap (EBG) structure is presented to reject harmonics of a crystal oscillator in the power distribution network. Compared to traditional EBG structures of complementary split ring resonator (CSRR), the proposed CSRR adding lumped capacitors (LC‐CSRR) provides a higher rejection‐performance at the series self‐resonant frequency of the lumped capacitors. A four‐layer printed circuit board is designed and fabricated to measure the S‐parameters of the proposed EBG structure, and a harmonics power testing board is presented to measure rejection performance of the proposed EBG structure. The measured results show that the proposed EBG obtains an attenuation of 60 dB over the whole range of global navigation satellite system band. By inserting the proposed EBG structure of LC‐CSRR, we measure that the harmonics powers can be decreased by 28.8 dB between the input and output of the EBG.