Synthetic dyes are considered toxic compounds and as such are not easily removed by conventional water treatment processes. This study demonstrated the synthesis of pure and manganese- (Mn), silver- (Ag), and iron- (Fe) doped zinc oxide (ZnO) nanoparticles via the wet chemical route. In particular, it investigated the batch adsorption studies and physiochemical properties of synthesized pure and doped ZnO materials for removing toxic congo red (CR) dye. X-ray diffraction (XRD), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDS) confirmed the synthesis of the pure and doped ZnO materials. The batch adsorption investigation revealed adsorption efficiencies of 99.4% for CR dye at an optimal dose of 0.03 g/30 ml for Mn-doped ZnO at a solution pH of 2. The adsorption capacity of each of the synthesized materials was found to be in order Mn-doped ZnO (232.5 mg/g) > Ag-doped ZnO (222.2 mg/g) > pure ZnO (212.7 mg/g) > Fe-doped ZnO (208.3 mg/g). Both pseudo-second-order kinetics model and the Langmuir isotherm model accurately explained the adsorption behaviors of CR dye. As such, Van der Waal interactions, H-bonding, and electrostatic interaction were found to be the adsorption mechanisms responsible for dye removal. In addition, the desorption-regeneration investigation indicated the successful reuse of the exhausted Mn-doped ZnO material for five cycles of CR dye adsorption with an efficiency of 83.1%. Overall, this study has demonstrated that Mn-doped ZnO could be considered a viable adsorbent for the cleanup of dye-contaminated water.
11 January 2025 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Fat, oil and grease (FOG) discharged into sewer networks can accumulate and solidify into hardened deposits that commonly known as fatbergs, through saponification, crystallization, and calcium aggregation. These fatbergs contribute significantly to sanitary sewer overflows, posing serious environmental and public health risks. Despite growing interest in this issue, there remains an urgent need for robust, real-time monitoring and predictive technologies to mitigate FOG-induced blockages and their associated economic costs. This review presents a comprehensive synthesis of current knowledge on the mechanisms of FOG deposition in sewers and critically evaluates existing models for blockage prediction, including mechanistic, data-driven, and Internet of Things-based approaches. While most studies have focused on saponification-driven FOG formation, limited attention has been given to crystallization and calcium-based aggregation which are key pathways that remain underrepresented in modelling frameworks. A novel aspect of this review is the integration of environmental, social, and sewage system parameters that influence FOG accumulation, providing a more holistic basis for future model development. The review identifies key knowledge gaps and proposes the development of a hybrid modelling platform that combines mechanistic and data-driven tools for accurate and scalable FOG monitoring.
1 May 2020 in International Journal of Chemical Studies