Soumei Baba

Soumei Baba

Auto-generated profile, based on publicly available information

Soumei Baba

Research Institute for Energy Conservation, National Institute of AIST, Ibaraki, Japan

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2020 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
SBSoumei Baba
Soumei Baba
STSanyo Takahashi
Sanyo Takahashi
NKNariyoshi Kobayashi
Nariyoshi Kobayashi
SHSatoshi Hirano
Satoshi Hirano

30 June 2021 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
SBSoumei Baba
Soumei Baba
KSKenichiro Sawada
Kenichiro Sawada
KTKohsuke Tanaka
Kohsuke Tanaka
AOAtsushi Okamoto
Atsushi Okamoto
In nature, many extant species exhibit functionalized surface structures during evolution. In particular, wettability affects the functionalization of the surface, and nano/microstructures have been found to enable functions, such as droplet jumping, thereby making self-cleaning, antifog, antibacterial, and antireflection surfaces. Important efforts are underway to understand the surface structure of plant leaves and establish rational design tools for the development of new engineering materials. In this study, we focused on the hierarchical nano/microstructure of the leaves of Euphorbia myrsinites (hereinafter, E. myrsinites), which has a hierarchical shape with microsized papillae, covered with nanosized protruding wax, and observed the condensation behavior on the leaf surface. Si is vertically etched via reactive ion etching (RIE) to artificially mimic the hierarchical nano/microstructures on the leaves of E. myrsinites. We made four types of artificial hierarchical structures, with micropillars having pillar diameters of 5.6 and 16 μm (pillar spacing of 20 and 40 μm, respectively) and heights of 6.5 and 19.5 μm, and nanopillars formed on the surface. The optical observation with a microscope revealed a very high density of condensed droplets on the artificial surface and a stable jumping behavior of droplets of 10 μm or more. Furthermore, in the samples with a micropillar diameter of 5.6 μm and a micropillar height of 19.5 μm, the droplets that had jumped and fallen thereupon bounced off, thereby preventing reattachment. As a result, no droplets of 35 μm or more could exist even after 10 min. In addition, it was clear that a small underlying droplet of less than 10 μm was generated at the bottom of the relatively large secondary droplet existing on the large micropillar of 16 μm, and a frequent coalescence of the droplets occurred. This study revealed the phenomenon of condensation on the surface of plants as well as made it possible to improve the heat exchange process by significantly promoting the heat transfer of condensation using artificial surfaces.

1 April 2020 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
SBSoumei Baba
Soumei Baba
NONobuaki Ohguri
Nobuaki Ohguri
YSYuji Suzuki
Yuji Suzuki
KMKouhei Murakami
Kouhei Murakami

6 August 2020 in Langmuir
Verified
Journal Article
Closed access
SBSoumei Baba
Soumei Baba
KSKenichiro Sawada
Kenichiro Sawada
KTKohsuke Tanaka
Kohsuke Tanaka
AOAtsushi Okamoto
Atsushi Okamoto

10 September 2014 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
SBSoumei Baba
Soumei Baba
NKNariyoshi Kobayashi
Nariyoshi Kobayashi
STSanyo Takahashi
Sanyo Takahashi
SHSatoshi Hirano
Satoshi Hirano
An anode gas recycle (AGR) system using an ejector for 1 kW solid oxide fuel cells (SOFCs) was developed to increase the electrical efficiency of combined power generation. We call this an AGR–SOFC. The effects of recirculation ratio, externally steam feed rate, and fuel utilization were determined experimentally on the AGR–SOFC performance (i.e., output power, stack temperature, and gas composition) using a variable flow ejector and a recirculation ratio of 0.55–0.62, overall fuel utilization of 0.720–84, and steam feed rate of 0–1.5 g/min. A quadrupole mass spectrometer was used to identify the recirculation ratio, the gas composition of reformed gas at the AGR–SOFC inlet, and that of the recycle gas at the outlet. Compared to one-path SOFC systems, i.e., without an AGR, the AGR–SOFC was stable and generated about 15 W more electricity when the overall fuel utilization was 0.84 and the recirculation ratio was 0.622 with no steam supply. This improved performance was due to the reduced H2O concentration in the anodic gas. In addition, although the recirculation ratio did not affect the AGR–SOFC performance, a high recirculation ratio can provide steam produced via the electrochemical reaction to the injected fuel for the steam reforming process.

7 February 2023 in Laser & Photonics Reviews
Verified
Journal Article
Closed access
HYHiroshi Yamagishi
Hiroshi Yamagishi
KFKeitaro Fujita
Keitaro Fujita
JMJunnosuke Miyagawa
Junnosuke Miyagawa
YMYuya Mikami
Yuya Mikami
HYHiroaki Yoshioka
Hiroaki Yoshioka
YYYohei Yamamoto
Yohei Yamamoto