Anna Carolina de Almeida Andrade

Anna Carolina de Almeida Andrade

Auto-generated profile, based on publicly available information

Anna Carolina de Almeida Andrade

Universidade Federal de Sergipe

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2022 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
AAAnna Carolina de Almeida Andrade
Anna Carolina de Almeida Andrade
TBThawane Rodrigues Brito
Thawane Rodrigues Brito
JSJosé Reinaldo Moreira da Silva
José Reinaldo Moreira da Silva
Sílvia Costa FerreiraSílvia Costa Ferreira
Sílvia Costa Ferreira
AJAntônio Américo Cardoso Junior
Antônio Américo Cardoso Junior
JLJosé Tarcíso Lima
José Tarcíso Lima
The density of the wood influences directly on the quality of the surface, on the resistance to cutting as well as on the energy required for processing. The aim of this study was to obtain the association between specific cutting energies and basic wood densities in peripheral milling with the use of a computer numerical control. For this purpose, wood from nine species with a wide range of basic densities were used. The specimens were milled in a router with a CNC. Both the feeding and routing speeds were constant, and there was no source of variation among treatments. The values of specific energy were calculated taking into account the active power, the cutting time and the volume of wood removed. Results showed that there was a moderate correlation (r=0.61) between specific cutting energy and basic wood density data. However, by observing the particularities of each species, it was noticeable that the specific cutting energy varied as a result of factors such as the anatomical structure and the type of wood grain. It was concluded that the basic wood density has a positive correlation on the specific cutting energy required, yet it does not explain this relationship alone.

1 March 2025 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
KRKeliane de Jesus Reis
Keliane de Jesus Reis
MLMárcio Ricardo Nascimento Lima
Márcio Ricardo Nascimento Lima
JSJorge Artur Santos
Jorge Artur Santos
LSLara Soares Ribeiro dos Santos
Lara Soares Ribeiro dos Santos
IVIsadora Luz Silva Moreira Vieira
Isadora Luz Silva Moreira Vieira
AAAnna Carolina de Almeida Andrade
Anna Carolina de Almeida Andrade
O lixamento é essencial para obter superfícies de madeira de alta qualidade, reduzindo imperfeições e preparando-as para acabamentos, resultando em maior durabilidade. O presente artigo teve por objetivo analisar a qualidade superficial da madeira de massaranduba por meio dos parâmetros de rugosidade Ra, Rq e Rz após o lixamento com diferentes granulometrias. Foram avaliados 50 corpos de prova submetidos ao lixamento com lixas de granulometrias 80, 120, 180, 220, 320, 400 e 600. A rugosidade foi medida com um rugosímetro de arraste (SURFTEST SJ-210) e analisada por ANOVA e teste de Scott-Knott (5% de significância) no software SISVAR. Os resultados mostraram que Ra e Rq seguiram o mesmo padrão, indicando que a lixa de 220 proporciona um acabamento superficial satisfatório. O parâmetro Rz apresentou um comportamento distinto, sugerindo que o melhor acabamento ocorre até a lixa de 400. Observou-se que a rugosidade diminuiu progressivamente com o lixamento. A sequência 80-120-180-220-320-400 demonstrou o melhor desempenho para todos os parâmetros estudados. Conclui-se que a sequência de lixamento até a lixa de 400 grãos é a mais indicada para a madeira de massaranduba, garantindo melhor qualidade superficial em todos os parâmetros avaliados.

1 October 2023 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
JSJorge Artur Santos
Jorge Artur Santos
KRKeliane de Jesus Reis
Keliane de Jesus Reis
LSLara Soares Ribeiro dos Santos
Lara Soares Ribeiro dos Santos
IVIsadora Luz Silva Moreira Vieira
Isadora Luz Silva Moreira Vieira
MLMárcio Ricardo Nascimento Lima
Márcio Ricardo Nascimento Lima
AAAnna Carolina de Almeida Andrade
Anna Carolina de Almeida Andrade
Society's growing demand for wood products makes the search for knowledge about planted species increasingly indispensable, as they reduce the pressure exerted on native forests. In this way, the present work aimed to investigate characteristics of the roughness of Paricá wood (Schizolobium amazonicum), through the parameters Ra and Rz, after the pieces were subjected to the sanding process with sandpaper of different grain sizes, varying between 80 to 600 grains, to so allocate them to their best use. For this purpose, the drag roughness meter, model SURFTEST SJ-210, was used. The results obtained were analyzed using the SISVAR statistical program, where analysis of variance (ANOVA) and the Scott & Knott test were performed, both at 5% significance. In this way, the best roughness and surface finish was observed after the 80 – 120 – 220 – 400 grit sanding sequence. In this case, average values of 0.9222 μm and 4.6766 μm were obtained for the Ra and Rz parameters, respectively. Thus, it is concluded that Paricá wood, when properly treated, becomes a viable source for the production of laminated panels due to the low roughness values obtained, a fact that allows greater contact between the wooden sheets, also increasing the adhesion of glues and thus avoiding greater waste.

24 November 2023 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
SCSendy Castro Abreu da Cunha
Sendy Castro Abreu da Cunha
ARAdriann Lucas Machado Rocha
Adriann Lucas Machado Rocha
MSMariane Silva
Mariane Silva
AAAnna Carolina de Almeida Andrade
Anna Carolina de Almeida Andrade
AJAntônio Américo Cardoso Júnior
Antônio Américo Cardoso Júnior
O objetivo deste trabalho foi correlacionar qualidade e preço comercializado das madeiras maciças indicadas para movelaria em madeireiras do município de Aracaju, SE, através de análises de rugosidade. Foram selecionados 15 estabelecimentos, onde apenas 33% comercializavam madeira maciça, notando-se então uma baixa usabilidade, em comparação a estabelecimentos que utilizam painéis de madeira, compondo cerca de 54%. Com auxílio de questionário de indicação e obtenção de dados, foram selecionadas seis espécies mais utilizadas, sendo elas: Maracatiara, Maçaranduba, Angico, Imbira, Sucupira e Freijó, onde foi possível analisar com precisão que não houve correlação entre preço e qualidade, indicando que é possível obter peças com alta qualidade superficial, o que é desejado para produção de móveis, com custo mais acessível. Gerando necessidade em fazer análise de mercado para buscar preços mais competitivos, uma vez que houve variação significativa entre os preços de uma mesma espécie e entre espécies, em função do estabelecimento orçado. Devido a baixa correlação entre qualidade e preço indica-se a madeira de Imbira para a produção de móveis, uma vez que a mesma apresentou o menor valor de mercado.

30 May 2023 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
FFFernanda Luíza dos Santos Fernandes
Fernanda Luíza dos Santos Fernandes
IRIvo Eduardo Oliveira Ribeiro
Ivo Eduardo Oliveira Ribeiro
MFMaria Isabel de Jesus Fraga
Maria Isabel de Jesus Fraga
MSMariane Silva
Mariane Silva
ARAdriann Lucas Machado Rocha
Adriann Lucas Machado Rocha
AJAntônio Américo Cardoso Junior
Antônio Américo Cardoso Junior
The present study aimed to evaluate the surface quality of reused wood, analyzing whether the behavior and characteristics indicated in the production of furniture are still maintained after use, in order to indicate appropriate uses and applications. In the furniture sector, the better the machined surface, the better the quality of the product. Two wood boards of Maçaranduba (Manilkara sp.) and Sucupira (Pterodon sp.) were then manually planed longitudinally and tangentially, considering the slow and fast machining speeds for each face, and the evaluation of the feed and speed speeds advancement per tooth. The relationship between feed speed and surface finish quality was observed, since faces machined at high speed presented a thick finish, obtaining 11.10 m.min-1 and 7.09 m.min-1 in feed speed for, respectively, Maçaranduba and Sucupira. The faces machined at slow speed showed medium quality of finish, less roughness and better quality of the planed surface according to the ASTM D 1666-22 standard when presenting 3.17 m.min-1 and 2.79 m.min-1 at speed of advance to, respectively, Maçaranduba and Sucupira. It was also noted that the faces that have a thick finish and, consequently, a higher feed speed per tooth, are subject to rework in order to achieve the necessary quality for furniture manufacturing. In view of this, it was verified that Maçaranduba machined slowly presented excellent surface quality, responding positively to the objective of the exposed work.

1 February 2024 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
LSLara Soares Ribeiro dos Santos
Lara Soares Ribeiro dos Santos
JSJorge Artur Santos
Jorge Artur Santos
KRKeliane de Jesus Reis
Keliane de Jesus Reis
MLMarcio Ricardo Nascimento Lima
Marcio Ricardo Nascimento Lima
IVIsadora Luz Silva Moreira Vieira
Isadora Luz Silva Moreira Vieira
AAAnna Carolina de Almeida Andrade
Anna Carolina de Almeida Andrade
The use of exotic species in commercial plantations is a reality in the current scenario of the Brazilian timber sector; however, there is limited utilization of the wide range of native species with productive potential for the same purpose. Therefore, studies are necessary to facilitate the introduction of native species in various timber-related fields, such as the furniture industry. One of the numerous species that stand out in this sector is Freijó (Cordia goeldiana Huber), as it possesses aesthetic and mechanical characteristics attractive for this purpose. Thus, the present study aims to evaluate characteristics that influence the surface quality of wood, including roughness. The parameters analyzed by the drag-type profilometer were Ra, Rq, and Rz after Freijó wood underwent treatment with abrasives of different grit sizes. The generated results were analyzed using the SISVAR statistical program, employing Completely Randomized Design (CRD), ANOVA, and the Scott-Knott Test, both at a 5% significance level. In conclusion, the recommendation is to use abrasives with grit sizes of 80 – 120 – 180 - 220, as they proved to be enough for achieving a surface that meets the requirements of the furniture industry.