2 January 2014 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a 60-dB gain bulk-driven Miller OTA operating at 0.25-V power supply in the 130-nm digital CMOS process. The amplifier operates in the weak-inversion region with input bulk-driven differential pair sporting positive feedback source degeneration for transconductance enhancement. In addition, the distributed layout configuration is used for all the transistors to mitigate the effect of halo implants for higher output impedance. Combining these two approaches, we experimentally demonstrate a high gain of over 60-dB with just 18-nW power consumption from 0.25-V power supply. The use of enhanced bulk-driven differential pair and distributed layout can help overcome some of the constraints imposed by nanometer CMOS process for high performance analog circuits in weak inversion region.
15 October 2007 in IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing
An ultra-low-voltage ultra-low-power CMOS Miller operational transconductance amplifier (OTA) with rail-to-rail input/output swing is presented. The topology is based on combining bulk-driven differential pair and dc level shifters, with the transistors work in weak inversion. The improved Miller OTA has been successfully verified in a standard 0.35-mum CMOS process. Experimental results have confirmed that, at a minimum supply voltage of 600 mV, lower than the threshold voltage, the topology presents almost rail-to-rail input and output swings and consumes only 550 nW.
23 February 2011 in Analog Integrated Circuits and Signal Processing
ECEvandro Daniel Calderaro Cotrim
Evandro Daniel Calderaro Cotrim
13 August 2014 in Analog Integrated Circuits and Signal Processing
1 January 2019 in Microelectronics Journal
1 April 2008 in IEICE Transactions on Electronics