David Nwabueze Onwe

David Nwabueze Onwe

Auto-generated profile, based on publicly available information

David Nwabueze Onwe

Department of Agricultural and Food Engineering, Faculty of Engineering, University of Uyo, P.M.B. 1017, Uyo, Akwa Ibom State, Nigeria

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2020 in Scientific African
Verified
Journal Article
Open access
DODavid Nwabueze Onwe
David Nwabueze Onwe
KUKingsley Umani
Kingsley Umani
WOWilliam Adebisi Olosunde
William Adebisi Olosunde
IOInimfon Samuel Ossom
Inimfon Samuel Ossom

30 June 2024 in Turkish Journal of Agricultural Engineering Research
Verified
Journal Article
Open access
PDF file
PEPromise Etim
Promise Etim
AAAkindele Alonge
Akindele Alonge
DODavid Onwe
David Onwe
IOInımfon Ossom
Inımfon Ossom
Solar drying is a renewable, efficient, cheap, and sustainable method of preserving agricultural produce. Recent trends in hybrid and greenhouse–type solar dryers were studied. The study revealed that hybrid and greenhouse–type dryers are robust and efficient because they are mostly embedded with heat generating and circulation systems. They are designed to accommodate large-scale drying of fruits and vegetables with higher rates of drying, reduced drying time and some other specific advantages. Findings also revealed that hybrid and greenhouse type solar dryers are mostly designed for optimum retention of heat to compensate for periods with low illumination. The study also gave insight into design challenges peculiar to these types of dryers, and further revealed that most of the fabrications were based on assumptions, with limited data as references. This review also highlights the cost of procurement, uniformity of airflow, sizing of blower and material selection as some of the factors limiting the utilization of hybrid and greenhouse type solar dryers for drying of fruits, vegetables, and other staple crops.

21 March 2023 in Asian Journal of Advances in Agricultural Research
Verified
Journal Article
Closed access
PDF file
DODavid Nwabueze Onwe
David Nwabueze Onwe
POPaul Okoko
Paul Okoko
MAMfrekemfon G. Akpan
Mfrekemfon G. Akpan
The properties of kernels, grains and seeds are important in the development of equipment for transportation, handling and processing. Physical and mechanical properties of Gmelina arborea where experimentally determined. The moisture content of Gmelina arborea was determined as 41.30%wb. The major, minor and intermediate diameters were 18.16 ± 1.79 mm, 10.52 ± 0.93 mm and 9.40 ± 0.81 mm respectively. The geometric and arithmetic mean diameter were calculated as 12.12 ± 1.10 and 9.56 ± 0.90 mm respectively. The sphericity was 66.91%, aspect ratio, 58.19, bulk and true densities, 0.64 kg/m3 and 0.96 kg/m3 respectively. The porosity and mass of a 1000 seeds were 66.67% and 621.33g respectively. The coefficient of friction determined on four different surfaces were; on wood, 0.4 ± 0.7, on galvanized steel, 0.37 ± 0.6, on glass, 0.36 ± 0.4 and on aluminum, 0.34 ± 0.6. The angle of repose was 24.09o. The compressive test conducted on the three major axes; vertical, horizontal and transverse shows that the energy needed for cracking of the Gmelina arborea is least on the horizontal axis, 0.808 ± 0.19 kN, followed by the vertical axis, 1.496 ± 0.35 kN and then the transverse axis, 2.39 ± 0.20 kN, with corresponding stress as 1.52 ± 0.35, 2.90 ± 0.45 and 4.90 ± 0.44 MPa respectively.

25 November 2024 in Journal of Engineering Research and Reports
Verified
Journal Article
Open access
PDF file
ONOnwe David Nwabueze
Onwe David Nwabueze
OCOkafor Victor Chijioke
Okafor Victor Chijioke
NBNathaniel Samuel Blessed
Nathaniel Samuel Blessed
Irregular and epileptic power supply in Nigerian, parts of Africa and some other parts of the globe has made electricity generators the primary source of power for domestic and commercial purposes in such places. These generators produce noise pollution in the environment. Noise pollution is hazardous to human hearing and health and it adversely affect plant growth and development. This study investigated the noise generated from five different capacity gasoline generators of varying ages at varying distances, representing the range of petrol generator for both domestic and commercial uses in Nigeria. Five petrol generators of varying capacities 2, 3, 6, 10 and 14 kilo Volt Ampere (kVA), and age 1, 2, 3, 4, 5 years respectively were used for the experiment. The sound level from the generators were measured at varying distances of 0, 5, 10, 15 and 20 m respectively using a digital sound level meter. Two-way Analysis of Variance (ANOVA) was used to test the difference between generators of different ages at the varying distances (α = 0.05). The sound intensity decreased as distance from the generators increased. The lowest sound was recorded for the generators of age 1, and increased as the age of the generators increased. For the capacity of generators tested, weighted (A) sound level produced by 1 year old generators at distances 0-20 m from the generator ranged from 60.9-83 dB (A) for 2 kVA generator; 60.2-84.1 dB (A) for 3 kVA generator; 64.7-86 dB (A) for 6 kVA generator; 66.52-88.02 dB (A) for 10 kVA generator; 70-91.8 dB (A) for 14 kVA generator respectively. The study showed that sound levels from generators increased as they aged. The sound levels from all the generators indicate noise pollution, as they are, on average, above the World Health Organization's specified limits of 30 and 70 decibels for indoor and outdoor environments, respectively. Consequently, the sound generated by various petrol generators is a significant source of noise pollution.

17 October 2022 in Journal of Engineering Research and Reports
Verified
Journal Article
Open access
PDF file
DODavid Nwabueze Onwe
David Nwabueze Onwe
ABAdeleke Isaac Bamgboye
Adeleke Isaac Bamgboye
The finitude and environmental impact of petroleum fuels have led to the search of alternative fuels and biodiesel has proven to be an alternative fuel to petro-diesel with less environmental impact. Engine performance and exhaust emissions of Sandbox Methyl Ester (SBME) fuel were evaluated. Pure SBME (B100) was blended with diesel at 5, 10, 15, 20, 25 and 50% volume designated B5, B10, B15, B20, B25 and B50 respectively. The diesel was used as a reference fuel. The fuel blends (B100-B5) and diesel was used to power a 4-stroke-single-cylinder diesel engine coupled to a dynamometer and a 7.5 kW alternator with varying loads. The brake specific fuel consumption (bsfc), brake power, thermal efficiency, carbon monoxide (CO), oxides of nitrogen (NOx) and hydrocarbon emissions were evaluated. The results of no-load to full-load indicated that diesel utilized the lowest bsfc of 0.14-0.62 kg/kW.h to produce the highest brake power of 5.6-3.7 kW. Similarly, the range of B5-B25 utilized bsfc of 0.16-0.86 kg/kW.h to produce the brake power of 5.1-2.9 kW. The brake thermal efficiency was 58-14% for diesel, and 52-10% for B5-B25. CO emission was reduced to 38.24-11.11% for B5 and 64.71-55.56% for B100. HC emission was reduced to 9.09-5.56% for B5 and 45.45-30.56% for B100. NOx emission increased with SBME concentration. The results obtained for the SBME engine performance and exhaust emissions established it as a potential fuel to power internal combustion engines.

30 June 2022 in Turkish Journal of Agricultural Engineering Research
Verified
Journal Article
Open access
PDF file
DODavid Onwe
David Onwe
ABAdeleke Isaac Bamgboye
Adeleke Isaac Bamgboye
Fuel properties of Sandbox Methyl Ester (SBME) blends were experimentally determined. Pure SBME designated B100 was blended with diesel at 5, 10, 15, 20, 25 and 50% volume designated B5, B10, B15, B20, B25 and B50 respectively. The fuel properties were determined according to American Society for Testing and Materials (ASTM) standards. Automotive Gas Oil (AGO) was used as a reference fuel. Fuel properties of the SBME were modified with the addition of diesel percentage in the blend from B100-B5: the density ranged from 891-865 kg m-3. The specific gravity ranged from 0.87-0.82. The kinematic viscosity ranged from 5.8-4.0 mm2 s-1. The flash and fire point decreased from 160-90°C and 230-140°C, while the cloud and pour points ranged from 4.6-3.4°C and -5.8-(-9.2)°C respectively. The heating value ranged from 40.50-41.45 MJ kg-1. The Cetane number for the SBME was 46.71. The saponification value ranged from 200-143 mgKOH g-1. The acid value varied from 2.7-2.2 mgKOH g-1, while the FFA content varied from 1.33-1.10 mg g-1. The Iodine value was in the range of 108-94 gI2 100g-1. The pH value varied from 6.80-5.60. The carbon content increased from 80.02-85.62 wt%, while the ash content increased from 0.01-0.16 g 100g-1. In comparison to the (AGO) and the ASTM standards, SBME was found to possessed good flow, ignition and combustion characteristics to power diesel engines.