Among machining processes, grinding has been used to achieve high dimensional tolerances and surface quality on workpieces. Yet, high levels of energy expenditure per volume of removed material and the need for cutting fluids make grinding one of the most environmentally impactful machining processes. Furthermore, changes in parameters such as grain and bond specifications of the grinding wheel, cutting speed, and specific material removal rate can lead to different productive and environmental results. Thus, the analysis of grinding processes should not be aggregated and leveraged into a single and broad output parameter. Instead, comprehensive study should be performed, in which the most relevant process parameters, inputs and outputs are considered. This paper presents a detailed study of grinding process, including the characterization of machine subunits and production modes, along with the use of a combined life cycle assessment hybrid model and real-time monitoring system to evaluate the consumption of energy, tooling, cutting fluid and compressed air. A detailed cradle-to-gate life cycle assessment study using eleven different impact categories and a productive performance assessment were performed to evaluate the effects on varying specific material removal rate and wheel type. For equal values of specific material removal rate, the change from a conventional wheel to a cubic boron nitride represented a power requirement increase of 19–24%. Cubic boron nitride wheel achieved remarkably better results on the wheel wear and part roughness indicators for all tested conditions. The environmental performance assessment showed a strict relation between the process environmental impacts and the consumption of electric energy and cutting fluid. To conclude, despite the higher power requirements, the combination of cubic boron nitride wheel with high values of specific material removal rate optimizes both the productive and the environmental results
Life cycle impact assessment is a crucial phase of the life cycle assessment (LCA) technique, once it identifies and quantifies the environment impacts of products/processes life cycle. This phase, however, is performed in a static way, becoming a bottleneck on a dynamic LCA of manufacturing processes. This paper presents a method to perform a web based dynamic life cycle inventory and impact assessment for manufacturing processes, in order to improve the data quality and accuracy of environmental aspects and potential impacts. The method implementation is based on combining Labview and GaBi softwares, as well as MTConnect® standard
The number of studies on green manufacturing has increased over the past years and particular focus has been placed on machining processes and the application of Life Cycle Assessment (LCA). This paper reports the results of the use of a modeling approach that combines Life Cycle Assessment (LCA) and Design of Experiments (DOE) to investigate a cylindrical plunge grinding for 21-2N steel. The effect of two process parameters on the LCA results of the grinding machining was studied through an analysis of variance (ANOVA). The parameters investigated were type of CBN grinding wheel (JB126 K150 VSS and 8B126 K150 VT2) and different levels of specific material removal rate (50, 100, 150 and 200 mm3/mm.min).