15 August 2018 in Industrial Robot: the international journal of robotics research and application
Purpose: In response to the poor reliability of live maintenance robots in semi-structured environments and the difficulty of monitoring their operation status, this paper aims to propose an online method for evaluating the operation status of high-voltage live maintenance robots based on fuzzy control. Design/methodology/approach: The robot bolt tightening operation is taken as an example. During the whole operation process, the key technologies of bolt tightening are analyzed theoretically, a two-dimensional fuzzy control model of bolt tightening process control is established and the control parameters, which characterize the operation status, are obtained. Through dynamic adjustment of the fuzzy controller, real-time online monitoring of the robot operation status can be achieved. Findings: The results of simulation experiments and 220 kV live operation experiments show that the reliability of robot bolt tightening is greatly enhanced by the proposed control method. Originality/value: The results not only verify the engineering practicability of the fuzzy control-based method but also indicate that it can improve efficiency, safety and operability.
21 August 2017 in Industrial Robot: the international journal of robotics research and application
Purpose: This paper aims to develop a robot for tightening charged bolt to solve the shortcomings of high labor intensity, low efficiency, high risk and poor reliability in artificially tightening drainage board bolt of strain clamp for high voltage transmission line. Realizing bolt-nut capture and location by manipulator is a critical process to complete the whole working task. To solve such key technology, an autonomous location control method for N-joint robot manipulator based on kinematics was proposed. Design/methodology/approach: Through D-H kinematics analysis under flexible working environment of transmission line, the autonomous location control of double manipulators can be abstracted as a nonlinear approximation problem based on joint inverse kinematics. In addition, regarding the complex coupling relationship among different joint angles and the complex decoupling process which leads to the non-uniqueness of inverse solution, an improved backpropagation (BP) network was proposed based on the combination of dynamic adaptive adjustment of learning rate and variable momentum factor, so that the inverse kinematics of manipulator can be solved and the optimization evaluation mechanism of inverse solution can be presented. The proposed autonomous location control method is of adaptability to flexible environment and structural parameters of different drainage boards. The simulation results verified the effectiveness of the proposed method. Compared with the other location control, this method can achieve faster location speed, higher precision and lower hardware cost. Finally, the field operation test further validated that such autonomous location control method was of strong engineering practicability. Findings: The proposed autonomous location control method is adaptable to a flexible environment and to the structural parameters of different types of drainage board. Simulation results confirm the effectiveness of the proposed method, which, in comparison with other approaches to location control, can achieve faster location, higher precision and lower hardware cost. Finally, a field test further confirms the engineering practicability of the proposed autonomous location control method. Originality/value: The proposed method can achieve faster location speed, higher precision which meet the requirement of real-time control relative to the standard BP algorithm. Moreover, it is of strong adaptability to flexible environment and structural parameters for different drainage board. Field operation experiment further validated the engineering practicability of the method.
2 April 2019 in Industrial Robot: the international journal of robotics research and application
Purpose: To improve the operational efficiency and intelligence of live operation robots in dynamic-unstructured operation environments, this paper aims to propose a fuzzy logic-based method for the autonomous search and visual localization control of a manipulator end effector applied to a drainage plate bolt on a high-voltage transmission line. The proposed approach is based on a four-way video image information output from a dual-operation manipulator. Design/methodology/approach: First, based on the structural characteristics of the drainage line, an autonomous search method for the drainage plate bolt and a mapping relationship between the autonomous search control parameters and the relative posture of the operation manipulator-drainage line are proposed. The posture control parameters of the dual manipulators can then be obtained, and a two-dimensional fuzzy controller is designed with the posture offset distance and the posture offset angle as its input signals. This enables the localization control of the bolt and nut alignment to be realized through a visual process. Findings: The proposed fuzzy control algorithm is used for bolt location control, and its performance is compared with that of the conventional approach. The simulation results indicate that the fuzzy control algorithm greatly improves the localization accuracy and operational efficiency of live operation robots. Originality/value: Field operation experiments on actual transmission lines verify that the fuzzy control-based visual localization control of the robot manipulator has great engineering practicality. Therefore, the proposed method further improves operational intelligence compared with conventional algorithms.