16 August 2022 in Advances in Structural Engineering
In this study, systematic numerical simulations are conducted to investigate how swirl ratio and radial Reynolds number affect the wind characteristics of multi-vortex tornadoes. By properly controlling boundary conditions, multi-vortex tornadoes are produced in a cylindrical computational domain. Six cases with different swirl ratios are studied to examine the influence of swirl ratio, while five cases with different radial Reynolds number are studied to investigate the influence of radial Reynolds number. To facilitate the characterization, the core size and rotational speed of subvortices, as well as the relative distance between the subvortex and the core radius of the main vortex, are defined. The results demonstrate that the increase in swirl ratio leads to the increase in the number of subvortices. For the overall vortex, the increase in swirl ratio decreases the maximum tangential velocity but increases the core radius of the overall flow. For subvortices, for the case where four subvortices are produced, the increase in swirl ratio increases the core size of subvortices but decreases the rotational speed of subvortices. While the increase in radial Reynolds number does not change the number of subvortices produced, it decreases the core size of subvortices, but increases the rotational speed of each subvortex.
1 August 2021 in Natural Hazards Review
A multivortex tornado refers to a tornado that contains two or more small subvortices in the wind field. Due to the presence of multiple vortices, this type of tornado is likely to be more dangerous and destructive than single-vortex tornadoes. To understand the action of the multivortex tornado on civil structures, the wind flow characteristics are investigated and compared with those of single-vortex tornadoes, by using computational fluid dynamics (CFD) simulations. The results show that the inner flow structure of a multivortex tornado is completely different from that of a single-vortex tornado. First, a multivortex tornado possesses more than one subvortex in the domain around the core radius of the main vortex, and each subvortex flows together with the main vortex while rotating around its own center. Second, the wind flow of a multivortex tornado is more turbulent than a single-vortex tornado, which may lead to significant dynamic responses in some types of civil structures. Third, the maximum negative pressure occurs at the center of each subvortex instead of the center of the main vortex, which means that the largest negative pressure and highest wind speed occur at the same location. This unique feature in the multivortex tornado leads to different worst loading scenarios from single-vortex tornadoes and the worst-case scenario might be the combination of high tangential velocity and high negative pressure around the core radius. Fourth, for a multivortex tornado, the difference between instantaneous values and space-averaged values of parameters is remarkable. Thus, the space-averaged values should be carefully used for determining design tornadic wind loads for civil structures.
1 December 2023 in Journal of Structural Engineering
CSCassandra A. Shivers-Williams
Cassandra A. Shivers-Williams
+1
1 September 2025 in Advances in Wind Engineering