Background: The construction sector is one of the sectors with the highest number of occupational accidents and diseases in the world in terms of working conditions. According to "Communiqué on Occupational Hazard Classes on Occupational Health and Safety" related to the occupational health and safety law numbered 6331, the construction sector is considered as "Very Dangerous Works" class. Methods: Occupational accidents that occurred between 2012-2019 is examined according to occupational groups, working environments, etc. Feature importance, Kendall, Pearson and Spearman correlations is used for analysing. Results: As a result of the studies, it is determined that fatal accidents in the construction sector in Turkey are caused by falling from height with high rate. When the correlation values were examined, it was determined that the column "accident type" had a negative relationship with the "injured part of the body" and a positive relationship with the "accident environment" column. Conclusion: 51% of 3517 fatal accidents are examined, occurred in the construction of buildings. Most of deaths in the construction sector in Turkey is caused by falling from height likewise many country (41.6%). Statistics shows that despite the relevant regulations in the construction sector in Turkey is seen as weak safety culture.
25 February 2021 in Cypriot Journal of Educational Sciences
The safety culture plays an important role in reducing deaths and injuries in many sectors and educational institutions in developing countries. In this study, it was aimed to determine the occupational health and safety (OHS) course, which is taught as a compulsory course in Istanbul Aydın University before taking the course at the beginning of the term and after taking the course at the end of the term, the difference in occupational safety knowledge level and the level of perception of occupational safety culture. A total of 281 questionnaires were deemed valid. For the research, two different surveys were used to measure. Considering the results, there are positive differences in the knowledge level of the students before and after taking the OHS lesson. It has been determined that the safety culture does not change according to demographic information. OHS should be taught to every student in the universities. Keywords: Occupational health and safety, Occupational safety education, Occupational health and safety lesson, Safety culture
Air transport is considered to be the safest means of transport. However, if an accident occurs, it often ends in catastrophe. Thus, significant efforts have been paid to sustain successful operations in aviation. Several studies have been carried out to understand the underlying reasons for accidents. This study used Fault Tree Analysis (FTA), Failure Mode and Effects Analysis (FMEA) and Causal Analysis based on Systems Theory (CAST) methods to analyse Tenerife aircraft accident and to compare the findings of different methods. The findings showed that while all three methods provided some overlapping findings, the CAST method led to the identification of all causes that were identified by other methods. Considering the nature of the causal factors, FMEA provided more causal factors that are related to organisation and technology than FTA. This study indicates that CAST has a significant value to identify all causes that can be identified by the use of traditional methods.
Ergonomics is a group of multidisciplinary studies that investigate and improve the compatibility of humans with the machine and the environment by examining the physical, environmental and psychological risk factors. The primary purpose of ergonomics is to ensure employee health and safety, and increase work efficiency (such as reduced idle capacity, increased production, increased product quality). Because employing workers in a healthy and safe condition enables an increase in work efficiency. In this study, ergonomic risk analysis was selected on the production line of an enterprise with the REBA method and suggestions for improvement were included. The working cluster consists of 30 unskilled workers on the production line. As a result of the analysis, 66.6% of the production process is at medium risk and 33.4% is at high risk. After the improvement works to be done, it is expected that ergonomic risks would reduce and an increase in production and efficiency.
Understanding the role of people in occupational accidents is very difficult. It is always assumed that people perform the behaviour that feels right to them. This study's main topic is the relationship between values, which form the basis of human behaviour, and safety motivation, fatalistic tendencies, risk perception and safety behaviour.
Bu çalışmanın amacı, iş sağlığı ve güvenliği (İSG) uygulamaları ile iş stresi ve işe bağlılık değişkenleri arasındaki ilişkileri incelemektir. Ölçüm tekniği olarak anket yöntemi kullanılmıştır. Ankete katılan 101 kişi İstanbul’da bulunan farklı sınıflarda iş güvenliği belgelerine sahip iş güvenliği uzmanları ve iş güvenliği teknikerlerinden oluşmaktadır. Araştırmada, sosyo-demografik bilgi formu, İSG Uygulamaları Performans Ölçeği, İş Stresi Ölçeği ve İşe Bağlılık Ölçeği kullanılmıştır. Yapılan analizler sonucunda iş stresi ile işe bağlılık arasında negatif bir ilişki bulunurken, işe bağlılık ile İSG Uygulamaları performansı arasında pozitif bir ilişki saptanmıştır. Bu çalışmanın sonunda, iş stresinin kurumlarda ortadan kaldırılması ya da en alt seviyeye indirilmesi, dolaylı olarak İSG performansını etkilediği ve bununla birlikte yönetimin katıldığı ve iletişimin yüksek olmasının İSG uygulamalarına olan bağlılığı artırarak iş kazalarının gerçekleşmesine olumsuz; güvenlik kültürünün oluşturulmasına ise olumlu bir etki yarattığı sonucuna varılmıştır.