1 March 2016 in AIP Advances
This paper reports an experimental study of the contact electrification (CE) that happens when glass spheres of identical materials collide under different ambient relative humidity (RH) conditions. The experimental results indicate that the net charge on a sphere from a single collision is significantly altered by varying the RH level; the charge increases with increasing RH at low humidity, and then decreases at high RH conditions. The net charge reaches a maximum in the 20%–40% RH range. To explain the dependence of the CE on RH, we propose a model which yields predictions in agreement with the experimental data. The model also reveals how CE can be affected by temperature and surface absorption energy.
19 January 2011 in Applied Optics
By taking net surface charge into consideration, the scattering field of particles illuminated by dual laser beams of phase Doppler anemometry (PDA) is computed based on Mie’s theory, and the effect of net surface charge on the phase–diameter relationship and the phase ratio is studied. It is found that the phase–diameter relationship and the relationship between the phase ratio and the refractive index of charged particles could be significantly different from those of uncharged particles, which would lead to errors in particle sizing and the measurement of refractive indices. A method of recognizing charged particles and determining the value of their surface conductivity, which is related to net surface charge, is proposed by utilizing the effect of net surface charge on the measurement of refractive indices using PDA.
14 March 2018 in IEEE Transactions on Applied Superconductivity
Distributed temperature sensing (DTS), such as Rayleigh-scattering interrogated optical fiber (RIOF) sensing, is a promising method for detecting quenches in high-temperature superconductor (HTS) magnets. One key for the successful implementation of RIOF-based DTS for quench detection is to identify effective quench detection criteria for the onset of a quench. In this paper, two DTS-based quench detection criteria, and their dependence on the operating current and heat disturbance characteristics, are investigated through numerical simulations of quench behavior in a YBa 2 Cu 3 O 7-δ (YBCO) HTS helix coil cooled by a liquid nitrogen (LN 2 ) bath and a YBCO HTS pancake coil cooled by conduction at 77 K. One is based on the minimum propagation zone (MPZ). The reference temperature to define the MPZ size is found for different operating currents. The other is based on the equilibrium temperature profile, in which the peak temperature and a characteristic normal zone length are found from a preselected reference temperature. The advantages and disadvantages of the two quench detection criterions are discussed and compared. Simulation results show that both criteria are independent of the nature of unpredictable heat disturbances. Similar to the helix coil, equilibrium temperature profiles independent of unpredictable disturbances are found for the pancake coil with different operating currents.
1 February 2014 in Review of Scientific Instruments
We construct an instrument to study the behavior of the critical current in superconducting tapes as a function of magnetic field and axial tension strain. The apparatus combines a material testing machine made by the non-magnetic stainless steel, which is capable of producing mechanical forces up to 1000 N and magnetic field up to 5 T with a homogeneous range of Φ150 × 110 mm. Moreover, the apparatus allows the automatic measurement of time dependence of voltage (V-t) under different magnetic fields and applied strains, which can be used to investigate the vortex instability and its time effect in the superconducting tapes. As an example, the simultaneous measurements of critical current and voltage relaxation with time at various strains and magnetic fields for the YaBa2Cu3O7−x coated conductors are carried out. Comparisons are made with the earlier reports in literature; the strain and magnetic field dependence of critical current indicate consistent behavior of this instrument.
13 January 2009 in Superconductor Science and Technology
15 April 2016 in Applied Optics
Phase Doppler anemometry (PDA) is one of the most popular optical techniques used to measure particle sizes. The configuration of PDA layout is important for accurate measurement. In this paper, considering the fact that particles are very likely charged due to many reasons, the selection of PDA layout parameters for measuring charged particles is studied. Effective regions in the receiver’s configuration parameter plane are found for charged particles. When parameters are selected from the effective regions, the phase-diameter curves of the PDA are linear, which satisfies the requirement of the working principle of PDA for measuring particle diameter. It is found that the scattered power of charged particles is attenuated, and the attenuation only has small oscillation with the variation of particle diameter and is mainly dominated by the surface conductivity, a phenomenological parameter for describing net surface charges carried by particles. A method is proposed to identify charged particles as well as their surface conductivities.