23 August 2022 in Advanced Materials
High‐power piezoelectric applications are predicted to share approximately one‐third of the lead‐free piezoelectric ceramic market in 2024 with alkaline niobates as the primary competitor. To suppress self‐heating in high‐power devices due to mechanical loss when driven by large electric fields, piezoelectric hardening to restrict domain wall motion is required. In the present work, highly effective piezoelectric hardening via coherent plate‐like precipitates in a model system of the (Li,Na)NbO3 (LNN) solid solution delivers a reduction in losses, quantified as an electromechanical quality factor, by a factor of ten. Various thermal aging schemes are demonstrated to control the average size, number density, and location of the precipitates. The established properties are correlated with a detailed determination of short‐ and long‐range atomic structure by X‐ray diffraction and pair distribution function analysis, respectively, as well as microstructure determined by transmission electron microscopy. The impact of microstructure with precipitates on both small‐ and large‐field properties is also established. These results pave the way to implement precipitate hardening in piezoelectric materials, analogous to precipitate hardening in metals, broadening their use cases in applications.
7 July 2023 in Physical Review Letters
We report an intrinsic strain engineering, akin to thin filmlike approaches, via irreversible high-temperature plastic deformation of a tetragonal ferroelectric single-crystal . Dislocations well-aligned along the [001] axis and associated strain fields in plane defined by the plane are introduced into the volume, thus nucleating only in-plane domain variants. By combining direct experimental observations and theoretical analyses, we reveal that domain instability and extrinsic degradation processes can both be mitigated during the aging and fatigue processes, and demonstrate that this requires careful strain tuning of the ratio of in-plane and out-of-plane domain variants. Our findings advance the understanding of structural defects that drive domain nucleation and instabilities in ferroic materials and are essential for mitigating device degradation.
12 May 2023 in Acta Materialia
19 January 2022 in Journal of Materials Research
BaTiO3 single crystals were deformed in compression along the $$\langle 110\rangle$$ crystal axis to study the plastic deformability and dislocation structures at high temperatures under different loading conditions. The yield strength is determined from stress–strain curves under strain rate control, load control, strain rate cycling tests, and under step-wise loading conditions to elucidate the impact of measurement approach in yield strength behavior. A comparison between the chosen methods based on stress-dependent strain rate plots indicates that load control measurements are a suitable alternative to the commonly used strain rate-control experiments in metals. This allows avoiding overloading and providing an estimate of the overall achievable strain rates in a ceramic. Activation energies and activation volumes in the temperature range of 1100–1170 °C indicate a similar mechanical deformation behavior to SrTiO3. Graphical abstract