This paper presents recommendations for selecting the type and magnitude of drained shear strength parameters for analysis of landslides. In particular, the importance, existence, and use of the cohesion shear strength parameter is reviewed. For slope stability analyses, it is recommended that the shear strength be modeled using a stress dependent failure envelope or a friction angle that corresponds to the average effective normal stress acting on the slip surface passing through that particular material instead of using a combination of cohesion and friction angle to represent soil shear strength. Other recommendations for stability analyses include using an effective stress cohesion of zero for residual and fully softened strength situations. To facilitate selection of shear strength parameters for landslide analyses, empirical relationships for the drained residual and fully softened strengths are updated from the previous empirical relationships presented by Stark and Eid. Finally, the paper presents...
Over 280 million tires are discarded each year and over 4 billion tires are stockpiled at numerous locations in the United States. The stockpiled tires represent a public health hazard, an aesthetic nuisance, and waste of a valuable resource. Recently, attention has been given to the use of scrap tires for civil engineering applications such as highway embankments, retaining structures, and lightweight fill material. This paper presents the results of a research study performed to assess the feasibility of using shredded scrap tires as a drainage material in cover systems for abandoned landfills. The research study included extensive laboratory testing and field demonstration at an abandoned landfill in Carlinville, Ill. Laboratory testing was conducted using tire shreds to determine the following: (1) potential for clogging when used in the cover systems; (2) long-term transmissivity when used in cover systems; and (3) interface shear strengths with various other cover materials. Slope stability analyses...
1 August 2005 in Journal of Performance of Constructed Facilities
Observations, data, and analyses that were used to investigate the cause of distress to a single-family residence located adjacent to a major highway cutslope are presented herein. The investigation revealed that the distress in the single-family residence was caused by a deep, large excavation-induced landslide. The excavation, which was made to widen an existing highway, helped trigger the landslide by exposing geologic structures on the cutslope and by unloading the toe of the slope. This case history illustrates some of the ramifications of large highway excavations in natural slopes surrounded by urban areas, e.g., exposing significant geologic features such as shear zones, faults, and folds; the importance of investigating and explaining signs of movement at both the top and toe of a slope; the impact of rainfall on the movement of a large slide mass; and that large slide masses can undergo slow, episodic movement instead of sudden, large movement.
1 March 2005 in Journal of Waterway, Port, Coastal, and Ocean Engineering
This paper presents practical applications of PSDDF (Primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill), which is described in a companion paper by the writers. In addition, consolidation and desiccation parameters for 27 dredged materials are presented from 20 U.S. Army Corps of Engineers placement areas to facilitate usage of PSDDF. The consolidation parameters of three cohesionless soils for sand capping and drainage and three compressible foundation materials are included to provide a PSDDF user with suitable parameters for these material types. To reduce the difficulty of obtaining the consolidation and desiccation parameters for dredged material, empirical correlations between the required parameters and soil index properties are presented.