15 November 2023 in IEEE Transactions on Power Electronics
This article proposes a novel wireless charging transmitter structure with a high rotational misalignment tolerance. It addresses the issue of reduced power transfer efficiency due to the rotating deviation in receiving coils, such as solenoid and Double D coils, which are constrained by the range of operating angles. The proposed transmitter is also compatible with unipolar coils such as circular and orthogonal magnetic structure receiving coils through magnetic field reconfiguration. The article also proposes an optimization method for the new structure and compares the optimized coupler with three typical couplers for compatibility and angular misalignment tolerance. Through the simulation and experimental verification, the DCDC transmission efficiencies are 84.4%, 84.6%, 84.0%, and 88.9% when the receiving coils are flat solenoid, Double D, orthogonal magnetic structures, and circular, respectively, with the transmission power of 100 W. Under 360° rotational misalignment, without the additional control circuitry, the system output voltage fluctuates less than 5% compared to when it is aligned.
30 August 2022 in IEEE Transactions on Industrial Electronics
Recently, bidirectional wireless power transmission (BD-WPT) technology has been increasingly used in electric vehicles (EVs) charging and discharging applications to realize interactive energy feedback between EVs and the power grid. Although the efficiency of BD-WPT system has been impressively improved, it still heavily relies on complex control methods. This article proposes a simple but effective control method to achieve maximum efficiency with zero reactive power. Specifically, a resonance judgment and phase synchronization network is employed to ensure the resonance performance and synchronization of the bilateral control signals, which realizes the stead autostarting of the secondary side and guarantees the disentanglement between power control processes as well. With the help of voltage ratio design and symmetric phase-shift between bilateral inverters, the optimization efficiency is well achieved. The results of the experiment and simulation match well, showing the effectiveness of the proposed method in this article.
2 August 2024 in IEEE Transactions on Power Electronics
Maintaining the high efficiency of the wireless charging system for electric vehicles in the full power range is the key point and difficulty in the application. In this article, a wide-range global optimal control (WGOC) method based on the battery impedance characteristics is proposed. Compared with the existing control methods, the losses of the circuits at all levels in the wide operating range are comprehensively considered to achieve the optimization of battery charging over a wide power range. The charging demand of the battery is responded to by the current closed-loop on the secondary side, and the overall efficiency of the system is dynamically optimized by the primary side. The active rectifier implements zero voltage switching and synchronous rectification for the entire cycle. An efficiency model based on the battery load is developed to obtain the optimal curve. The steady-state parameters and the efficiency for a wide power range are accurately calculated. Finally, a 3.5 kW prototype is developed. The experimental results verify the accuracy of the parametric model. Moreover, the WGOC improves the efficiency in all power ranges and the efficiency improvement is up to 9.5% for light load. The applicability of the WGOC is also verified.
30 June 2023 in IET Power Electronics
The energy harvesting of ultra‐high voltage transmission lines and wireless power transmission technology are effective means to solve the stable energy supply of outdoor tower equipment. However, there are inevitably technical problems such as long transmission distance, weak coupling, and parameter sensitivity. In this paper, an effective design approach for a power demand‐oriented long‐distance wireless power transmission system is proposed. With the goal of transmitting power, a system equivalent parameter model is established to address the sensitivity of design parameters for the point‐to‐point long‐distance wireless power transmission system, and the main influencing factors that lead to system power transmission failure are analyzed. To effectively address the impact of high‐sensitivity parameters, a fast‐tuning method with redundant capacitance matrix compensation is proposed, which improves the deviation problem in system parameter design, improves the efficiency of offset parameter matching, and analyzes the impact of wireless energy transmission systems on high‐voltage insulator strings. Finally, an experimental platform was constructed to achieve power transmission at a distance of not less than 5 m at a resonant frequency of 50 kHz. The transmission efficiency met the design expectations and verified the effectiveness of the analysis.
5 November 2024 in IEEE Transactions on Industrial Electronics
To improve the communication speed and reliability of the transmitter and receiver of the wireless power transfer system, this article proposes a three-channel M-ary frequency shift keying simultaneous wireless power and data transfer system (SWPDT). The SWPDT system adopts a high-frequency carrier series injection method to ensure the independence of the power channel and information channel. By utilizing the characteristic of high-order circuits with multiple resonant points, three information channels have been constructed, which can achieve serial and parallel data encoding to improve the transfer capacity and reliability of information channels. The transmission characteristics and mutual interference of power and information channels are analyzed and center frequencies of the three information channels are determined in this article. The results show that the center frequency of the information channels is almost not affected by the mutual inductance of the power coupler coils. Finally, a 1 kW SWPDT prototype with 1.8 Mbps half-duplex communication is presented to demonstrate the proposed system.
16 November 2020 in IEEE Access
In this paper, the wireless power transmission system and the model of mouse with its main organs are established to simulate the electromagnetic field and electromagnetic thermal effect. The mouse is placed at the system, and the peak value of the induced electric field intensity and temperature rise of each organ are calculated. The results show that the peak value of the induced electric field intensity of the liver is the largest, which is $1.43~V/m$ . Temperature rise of the kidney is the largest, which is $2.736 \times {10^{ - 6}}^{\circ }\text{C}$ . And the results indicate that the shielding plate can effectively reduce the peak value of induced electric field intensity and temperature rise of the main organs. Then, a biosafety experimental platform for the wireless power transmission system is set up to analyze changes in biological tissue structure, immune factors, and sex hormone content. The results show that the level of immune factors in mice increase significantly, and the level of testosterone and progesterone decrease. The heart tissue structure does not change, but the liver, spleen, ovary, and testes are affected. And the liver shows the greatest morphological changes, which is consistent with the simulation results. This study provides a theoretical basis for the security assessment of the wireless power transmission system.