1 March 2016 in ACS Applied Materials & Interfaces
26 February 2016 in Journal of Materials Chemistry A
Nanofiltration membranes featuring high permeability, selectivity and anti-fouling properties represent a focal point of advanced membrane technologies for clean water production and purification. Inspired by “water channel” structures and fouling resistance characteristics of biological membranes, we fabricated a novel thin-film nanocomposite (TFN) membrane containing zwitterionic polyelectrolyte nanoparticles (ZPNPs) by interfacial polymerization, wherein ZPNPs act as building blocks allowing for simultaneously improved permeability, selectivity and anti-fouling properties. By modulating the zwitterionic group content and ionic cross-linking degree of ZPNPs, the TFN-ZPNP membrane showed high water permeability (109.7 L m−2 h−1 MPa−1) and enhanced NaCl/Na2SO4 selectivity (28.4), respectively; these values were 191% and 125% of those for the pristine polyamide membrane. It was also demonstrated that the incorporation of ZPNPs can increase the surface hydrophilicity, electronegativity and reduce the surface roughness, leading to an improved anti-fouling performance against the bovine serum albumin protein foulant.
14 August 2013 in Journal of Materials Chemistry A
Zwitterionic colloid particles (ZCPs), a novel type of membrane material endowed with tunable selectivity and improved antifouling properties, were synthesized from 3-dimethyl(methacryloyloxyethyl) ammonium propane sulfonate (DMAPS) and 2-hydroxyethyl acrylate (HEA) by means of aqueous free-radical polymerization. Atomic force microscopy and dynamic light scattering analyses indicated that the water dispersed ZCPs nanoparticles (300–600 nm) were formed owing to the competitive balance between the electrostatic attraction of DMAPS and the hydrophilic dispersion effect of HEA. As such, when the DMAPS content in ZCPs was selected in the range of 19.4 to 37.1 mol%, ZCP membranes (ZCPMs) were prepared via surface coating, followed by glutaraldehyde crosslinking at 50 °C for 3 h. The ZCPMs have a good separation performance to organic molecules (polyethylene glycol, PEG) and inorganic salts (Na2SO4). For example, the average rejection of ZCPMs to PEG1000, PEG600, PEG200 and Na2SO4 is about 96%, 88%, 60%, and 20%, respectively. Noteworthy, the nanostructures of ZCPs and their membrane performances could be conveniently adjusted by tuning the monomer ratio in copolymerization, the H2SO4 concentration in the casting solution and the pH value of the feed solution. Furthermore, by using humic acid and bovine serum album as model organic foulant molecules, the antifouling properties of ZCPMs proved to be excellent as exemplified by the stable water flux and salt rejection versus filtration time.
2 June 2010 in The Journal of Physical Chemistry B
14 October 2009 in Journal of Materials Chemistry
Polyelectrolyte–polyelectrolyte complexes/multiwall carbon nanotubes (PECs/MWCNTs) nanocomposites have not been prepared until now because PECs are generally insoluble and infusible. In this work, solution-processable PEC/MWCNT nanocomposites and their membranes were prepared by in situ incorporation of MWCNTs into bulk PECs. The ionic complexation between poly(diallyldimethylammonium chloride) (PDDA) and sodium carboxymethyl cellulose (CMCNa) in the presence of MWCNTs was followed by ζ potential and optical transmittance measurements. Structures of PEC/MWCNT nanocomposites were characterized by FT-IR, thermogravimetric analysis (TGA), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). It is found that MWCNTs are encapsulated by a layer of PEC and dispersed in a PEC matrix mainly on a single nanotube level. Mechanical properties of the nanocomposite membrane loaded with 7 wt% MWCNTs are greatly improved, showing 2.6 times higher tensile strength and 1.8 times higher modulus as compared with that of the pristine PEC. PEC/MWCNT nanocomposite membranes also display very high performance in pervaporation dehydration of isopropanol. This high pervaporation performance is reproducible with cycling feed temperatures and stable with increasing operation time up to 20 days.
6 March 2013 in Macromolecules