The aluminium alloy with chemical conception AlMgSi prepared by PM (powder metallurgy) technology was used. The experiments such as a ring and compression test, ECAR (equal channel angular rolling) for determination of friction coefficient, stress-strain curves and material workability based on analytical methods (Freudenthal, Cockcroft-Latham and normalized Cockcroft-Latham criteria) were performed. Numerical simulations of sample processed by ECAR was carried out by a software Deform 3D with focus on the description of stress, strain fields and workability criteria (Cockcroft-Latham and normalized Cockcroft-Latham). The prediction of fracture formations in a real ECAR sample during processing conditions was also done.
The determination of ductile fracture criteria as well as friction coefficient, stress-strain curves, constants for Hollomon's equation and a material workability based on analytical methods as a forming limit diagram, a normalized Cockcroft-Latham criteria (nCL)) ring and compression tests for two materials based on aluminum and copper alloys were carried out. A calculation of nCL criteria on the basis of a compression test and numerical simulations was made. The critical values nCL criteria resulting from compression test were determined. Prediction of nCL criteria by numerical simulations were confirmed by laboratory compression tests. The values obtained from numerical simulations and compression tests for both materials show a good coincidence in results.