24 September 2021 in IEEE Transactions on Transportation Electrification
The high current pulse in traction network is an extreme and dangerous situation, and the short-circuit experiment is to simulate this situation. The short-circuit experiment of traction network has always been very important to detect the safety and stability of high-speed railway (HSR). This article presents an electromagnetic emission (EME) prediction method of the traction network short-circuit experiment. The multiconductor transmission line (MTL) is used to model the traction network, considering the nonuniform distribution of each conductor, the tunnel, and other complex factors. General regression neural network (GRNN) is introduced to simplify the calculation of the parameter matrix in the tunnel. Combined with the finite difference time domain (FDTD) method, the low frequency transient current distribution and EME on the line are predicted, and its accuracy is verified by field test. This method provides a theoretical basis for the evaluation of electromagnetic interference (EMI) of HSR and the protection of surrounding weak current equipment.
23 December 2021 in IEEE Transactions on Power Delivery
This paper presents an approach for the time domain statistical simulation of field-to-wire coupling model with uncertain wire position in traverse direction. The parameters of governing equations of field-to-wire coupling model about the wire position are expanded to the augmented governing equations by using the generalized polynomial chaos technique with normalized orthogonal basis functions. And the coefficients of the polynomial chaos expansions are solved by combining with the stochastic Galerkin method. However, the solution of augmented governing equations is a complex problem. Therefore, a new finite-difference time-domain (FDTD) algorithm based on the implicit Wendroff difference format is proposed to solve the governing equations, and the general iterative equations are given in this paper. The proposed methods are verified by a field-to-wire coupling model. The effectiveness and advantages of the new FDTD algorithm and the uncertainty analysis method based on generalized polynomial chaos technique are verified, which are achieved by comparing with the conventional leapfrog fashion FDTD algorithm and the Monte Carlo technique, respectively.
2 November 2020 in IEEE Transactions on Electromagnetic Compatibility
The electromagnetic interference caused by electrified high-speed railway (HSR) through the protection areas of nondirectional beacon (NDB) is an important issue, especially when the train passes through the neutral section (NS). In this article, based on the theory of multisection transmission line and considering complex factors, the calculation method of medium-frequency current and electromagnetic emission (EME) on the contact wire (CW) when the train passes through NS is given. The radiation properties of the CW were studied quantitatively and its validity was verified by practical measurement. Then, the influence of HSR on NDB navigation signal is analyzed, and the protection distance of NS is given. This method provides theoretical basis for EME of HSR and guidance for airport site selection.
14 November 2022 in Applied Computational Electromagnetics Society Journal (ACES)
In this article, a radiation model is proposed to estimate the emission of the pantograph arc. An improved least-square regression analysis method is given for studying the pantograph arc characteristics at various sites on electrified railways and at various train speeds. The radiation model and the improved least-square method were both validated using the test data. The impact of arc on the airport instrument landing system (ILS) was investigated using electromagnetic wave propagation theory and the signal-to-noise ratio requirement of the ILS. We deduced the position limit of the articulated neutral section (ANS) and verified it through experiments. This research provides a theoretical foundation and technological methodology for civil aviation and high-speed railway electromagnetic compatibility studies as well as helps for airport site selection and high-speed railway route planning.
9 July 2022 in Applied Computational Electromagnetics Society Journal (ACES)
In view of the electromagnetic interference (EMI) of the signal shielded cable in the rail weighbridge, the interference source is analyzed on the basis of the field measurement and investigation, and methods of suppressing the crosstalk voltage of the shielded cable are proposed. First, the capacitive coupling model between the power line and the shielded cable is established, and the coupling model between the shielded layer and the core is developed. Later, the distribution parameters of the multi-conductor transmission line system are extracted by the commercial software ANSYS based on the finite element method. Then the coupling voltages of the shielded layer and the core can be calculated; compared with the measured results, the accuracy and effectiveness of the proposed method are verified. Finally, the EMI suppression methods are proposed and its effectiveness is verified. The EMI of the shielded cable is very common in engineering, and this method has a good reference value for solving the similar problems.