29 December 2020 in Advanced Functional Materials
10 December 2014 in Nanoscale
Fiber electrochemical capacitors show advantages such as light weight and flexibility, and may also be easily integrated or woven into various electronic devices with low cost and high efficiency. In this work, we report the preparation of ZnCo2O4 nanorods on a Ni wire as the fiber electrodes, using a simple and rapid single-step hydrothermal process. The electrochemical properties of the free-standing supercapacitor were analyzed using a two electrode system. The supercapacitor achieved a specific capacitance of 10.9 F g−1. An energy density of 76 mWh kg−1 and a power density of up to 1.9 W kg−1 were also obtained for the fiber supercapacitors. The flexible supercapacitor exhibited remarkable electrochemical stability when subjected to bending at various angles, illustrating the promise for use as electrodes for wearable energy storage.
19 December 2019 in InfoMat
Low‐dimensional (including two‐dimensional [2D], one‐dimensional [1D], and zero‐dimensional [0D]) semiconductor materials have great potential in electronic/optoelectronic applications due to their unique structure and characteristics. Many 2D (such as transition metal dichalcogenides and black phosphorus) and 1D (such as NWs) materials have demonstrated superior performance in field effect transistors, photodetectors (PDs), and some flexible devices. And in some hybrid structures of 0D materials and 1D or 2D materials, the modification of 1D and 2D devices by 0D materials is embodied. This type of hybrid heterostructure has a larger performance optimization compared with the original. In the application of PDs, the variety of low‐dimensional materials and properties enable wide‐spectrum detection from ultraviolet UV to infrared, which provide a potential option for PDs under various conditions. For flexible electronic devices, high performance and mechanical stability are two important features. Low‐dimensional materials offer unparalleled advantages in flexible devices. In this review, we will focus on the various low‐dimensional materials that have been extensively studied and their applications in the electronics/optoelectronic and flexible electronics. From the composition and lattice structure of materials (including alloys) to the construction of various devices and heterostructures, we will introduce their application and recent development under various conditions. These works can provide valuable guidance for the construction and application of more high‐performance and multifunctional devices. image
20 January 2024 in Nature Communications
In situ monitoring of endogenous amino acid loss through sweat can provide physiological insights into health and metabolism. However, existing amino acid biosensors are unable to quantitatively assess metabolic status during exercise and are rarely used to establish blood-sweat correlations because they only detect a single concentration indicator and disregard sweat rate. Here, we present a wearable multimodal biochip integrated with advanced electrochemical electrodes and multipurpose microfluidic channels that enables simultaneous quantification of multiple sweat indicators, including phenylalanine and chloride, as well as sweat rate. This combined measurement approach reveals a negative correlation between sweat phenylalanine levels and sweat rates among individuals, which further enables identification of individuals at high metabolic risk. By tracking phenylalanine fluctuations induced by protein intake during exercise and normalizing the concentration indicator by sweat rates to reduce interindividual variability, we demonstrate a reliable method to correlate and analyze sweat-blood phenylalanine levels for personal health monitoring.
27 April 2018 in Science China Materials
The development of pressure sensors with highly sensitivity, fast response and facile fabrication technique is desirable for wearable electronics. Here, we successfully fabricated a flexible transparent capacitive pressure sensor based on patterned microstructured silver nanowires (AgNWs)/polydimethylsiloxane (PDMS) composite dielectrics. Compared with the pure PDMS dielectric layer with planar structures, the patterned microstructured sensor exhibits a higher sensitivity (0.831 kPa−1, <0.5 kPa), a lower detection limit, good stability and durability. The enhanced sensing mechanism about the conductive filler content and the patterned microstructures has also been discussed. A 5×5 sensor array was then fabricated to be used as flexible and transparent wearable touch keyboards systems. The fabricated pressure sensor has great potential in the future electronic skin area. 对可穿戴电子设备来说, 采用简易制备技术得到具有高灵敏度、 快速响应的压力传感器至关重要. 本文成功地研制了一种基于特殊微结构银纳米线/PDMS复合电介质层材料的柔性透明电容式压力传感器. 与采用纯PDMS平面结构的电介质层器件相比, 有微结构的传感器具有更高的灵敏度(0.831 kPa−1, <0.5 kPa), 更低的检测范围, 更好的稳定性和耐久性. 本文对导电填料含量和微结构的增强传感机理也进行了讨论. 此外, 还研制了一个5×5的传感器阵列并用于柔性透明的可穿戴式触摸键盘系统. 研究结果表明所研制的压力传感器在未来的电子皮肤领域将具有良好的应用前景.
9 November 2021 in Nature Communications
Polarized light can provide significant information about objects, and can be used as information carrier in communication systems through artificial modulation. However, traditional polarized light detection systems integrate polarizers and various functional circuits in addition to detectors, and are supplemented by complex encoding and decoding algorithms. Although the in-plane anisotropy of low-dimensional materials can be utilized to manufacture polarization-sensitive photodetectors without polarizers, the low anisotropic photocurrent ratio makes it impossible to realize digital output of polarized information. In this study, we propose an integrated polarization-sensitive amplification system by introducing a nanowire polarized photodetector and organic semiconductor transistors, which can boost the polarization sensitivity from 1.24 to 375. Especially, integrated systems are universal in that the systems can increase the anisotropic photocurrent ratio of any low-dimensional material corresponding to the polarized light. Consequently, a simple digital polarized light communication system can be realized based on this integrated system, which achieves certain information disguising and confidentiality effects.