13 October 2023 in Science Advances
Understanding the relationship among elemental compositions, nanolamellar microstructures, and mechanical properties enables the rational design of high-entropy alloys (HEAs). Here, we construct nanolamellar Al
x
CoCuFeNi HEAs with alternating high– and low–Al concentration layers and explore their mechanical properties using a combination of molecular dynamic simulation and density functional theory calculation. Our results show that the HEAs with nanolamellar structures exhibit ideal plastic behavior during uniaxial tensile loading, a feature not observed in homogeneous HEAs. This remarkable ideal plasticity is attributed to the unique deformation mechanisms of phase transformation coupled with dislocation nucleation and propagation in the high–Al concentration layers and the confinement and slip-blocking effect of the low–Al concentration layers. Unexpectedly, this ideal plasticity is fully reversible upon unloading, leading to a remarkable shape memory effect. Our work highlights the importance of nanolamellar structures in controlling the mechanical and functional properties of HEAs and presents a fascinating route for the design of HEAs for both functional and structural applications.
6 January 2021 in Journal of Polymer Research
29 November 2021 in Scientific Reports
Interfacial adhesion between polymer matrix and reinforcing silica nanoparticles plays an important role in strengthening polypropylene (PP) composite. To improve the adhesion strength, the surface of silica nanoparticles can be modified by grafted functional molecules. Using atomistic simulations, we examined the effect of functionalization of silica nanoparticles by hexamethyldisilazane (HMDS) and octyltriethoxysilane (OTES) molecules on the deformation and failure of silica-reinforced PP composite. We found that the ultimate tensile strength (UTS) of PP composite functionalized by OTES (28 MPa) is higher than that of HMDS (25 MPa), which is in turn higher than that passivated only by hydrogen (22 MPa). To understand the underlying mechanistic origin, we calculated the adhesive energy and interfacial strength of the interphase region, and found that both the adhesive energy and interfacial strength are the highest for the silica nanoparticles functionalized by OTES molecules, while both are the lowest by hydrogen. The ultimate failure of the polymer composite is initiated by the cavitation in the interphase region with the lowest mass density, and this cavitation failure mode is common for all the examined PP composites, but the cavitation position is dependent on the tail length of the functional molecules. The present work provides interesting insights into the deformation and cavitation failure mechanisms of the silica-reinforced PP composites, and the findings can be used as useful guidelines in selecting chemical agents for surface treatment of silica nanoparticles.
1 October 2023 in APL Materials
High entropy alloys (HEAs) in the solid solution (SS) phase have attracted much attention due to their novel strengthening mechanisms. Recent studies have shown that introducing nanoscale precipitates/fillers can further strengthen the SS HEAs. In this work, we performed large-scale molecular dynamics simulations of AlxCoCuFeNi HEAs filled with randomly distributed AlNi3 nanoparticles. The effects of AlNi3 particle size and volume fraction, the chemical composition of the HEA matrix, and temperature on the mechanical properties, deformation, and failure behavior of the composite are systematically investigated. Our simulations show that, remarkably, the AlNi3 nanoparticles can simultaneously enhance the ultimate tensile strength and ultimate tensile strain of the composite. The underlying mechanism is that the AlNi3 nanoparticles greatly suppressed the phase change and dislocation appearance in the HEA matrix, resulting in a delayed material failure during the deformation. We also find that Young’s modulus, ultimate tensile strength, and ultimate tensile strain follow the lower-bound of the rule of mixtures and further present the underlying reason for this lower-bound relation. The present work not only provides insights into the mechanical properties, deformation, and failure behavior of AlNi3 nanoparticle-reinforced AlxCoCuFeNi HEAs but is also useful for guiding the rational design of HEAs for engineering applications.
1 December 2018 in Materials & Design
ACAthanasius Louis Commillus
Athanasius Louis Commillus
1 July 2003 in Engineering with Computers