To address the problems of a low tracking accuracy and slow error convergence in high-order single-input, single-output electro-optical tracking systems, a backstepping control method based on a Softsign linear–nonlinear tracking differentiator is proposed. First, a linear–nonlinear tracking differentiator is designed in conjunction with the Softsign excitation function, using its output as an approximate replacement for the conventional differentiation process. Then, this is combined with backstepping control to eliminate the “explosion of complexity” problem in conventional backstepping procedures due to repeated derivation of virtual control quantities. This reduces the workload of parameter tuning, takes into account the rapidity and stability of signal convergence, and improves the trajectory tracking performance. This method can ensure the boundedness of the system signal. The effectiveness and superiority of this control method are verified through simulations and experiments.
A modified Extended State Kalman Filter (ESKF)-based Model Predictive Control (MPC) algorithm is introduced to tailor the enhanced disturbance suppression in electro-optical tracking systems. Traditional control techniques, although robust, often struggle in scenarios with concurrent internal, external disturbances, and sensor noise. The proposed algorithm effectively overcomes these limitations by precisely estimating system states and actively mitigating disturbances, thus significantly boosting noise and perturbation control resilience. The primary contributions of this study include the integration of ESKF for accurate system state and disturbance estimation in noisy environments, the embedding of an ESKF estimation-compensation loop to simulate an improved disturbance-free system, and a simplified modeling approach for the controlled device. This designed structure minimizes the reliance on extensive system identification, easing the predictive control model-based constraints. Moreover, the approach incorporates total disturbance estimation into the optimization problem, safeguarding against actuator damage and ensuring high tracking accuracy. Through rigorous simulations and experiments, the ESKF-based MPC has demonstrated enhanced model error tolerance and superior disturbance suppression capabilities. Comparative analyses under varying model parameters and external disturbances highlight its exceptional trajectory tracking performance, even in the presence of model uncertainties and external noise.
This article presents a Robust Servo Linear Quadratic Regulator (RSLQR) method based on the Linear Extended State Observer (LESO), which solves the problem of optimal tracking control of electro-optical system under disturbance. For the problem that the accuracy of the electro-optical tracking system is reduced due to disturbance and modeling error, the LESO is adopted in this article to obtain and compensate the influence of internal and external disturbances in the controlled object model, so as to improve the disturbance suppression ability of the electro-optical tracking system. Considering the influence of weighting matrix in the RSLQR method on system's dynamic response performance, this article presents a selection criterion of weighting matrix in the RSLQR to meet the performance requirements of closed-loop system. Through simulation analysis and experimental verification, the design method proposed in this article has great reference value for the optimization of the dynamic response performance of the electro-optical tracking system and the improvement of the disturbance suppression ability.