4 April 2016 in IEEE Transactions on Aerospace and Electronic Systems
This paper describes the implementation of a reliable maximum power point tracking design as an analog circuit for use on a satellite relying on solar power generation within low Earth orbit. The environment in which such a spacecraft system would function is evaluated. A specific maximum power point tracking algorithm is selected with regards to environmental constraints. A further increase in reliability was achieved by only using carefully selected analog components that are suitable for use within a space environment. The system was prototyped, and its power conversion performance was characterized using a custom-built measurement setup. The system successfully tracked the maximum power point through all the performed measurements. The results from the measurements suggest that the prototyped system has a nominal regulator efficiency of 88% and a nominal tracking accuracy of 96%.
19 June 2018 in IEEE Transactions on Aerospace and Electronic Systems
In this paper, a novel balancing circuit is proposed, which is well suited to aerospace electronics, as it allows for the use of off-the-shelf radiation tolerant components. The new design was examined analytically with and without a zero- voltage switching topology. Its performance was compared to other popular battery balancing circuits. Further, an equation was derived which can be used to estimate the time to balance. The proposed balancer circuit was evaluated using forward and several flyback transformer types, and with the use of static and dynamic testing, the design was also evaluated under fault conditions as it provides a short circuit protection. It was determined experimentally that the proposed design achieves an efficiency of up to 84%.
1 January 2015 in IFAC-PapersOnLine
1 January 2015 in IFAC-PapersOnLine