30 August 2016 in Journal of Optical Communications and Networking
We review margins used in optical networks and review a formerly proposed margin taxonomy. For each category of margins, we review techniques that the network designer can use in order to increase the capacity of optical networks, extend their life, and decrease deployment cost (CAPEX) or total cost of ownership over their life duration. Green field (new network deployments) and brown field techniques (used after initial network deployment) are discussed. The technology needed to leverage the margins and achieve the aforementioned gains are also reviewed, along with the associated challenges.
9 February 2021 in Journal of Optical Communications and Networking
The estimation of the quality of transmission (QoT) in optical systems with machine learning (ML) has recently been the focus of a large body of research. We discuss the sources of inaccuracy in QoT estimation in general; we propose a taxonomy for ML-aided QoT estimation; we briefly review ML-aided optical performance monitoring, a tightly related topic; and we review and compare all recently published ML-aided QoT articles.
15 May 2023 in Journal of Optical Communications and Networking
Digital twins capable of quality of transmission (QoT) estimation and prediction are powerful tools for efficient design and operation of optical networks. In this paper, we employ machine learning techniques to enhance both the QoT estimation and prediction capabilities of an optical network digital twin. By leveraging a method to infer or refine the unknown lumped loss distributions and amplifier gain spectra for accurate characterization of the current optical network state, the accuracy of estimation and prediction is substantially improved. For QoT prediction, we further develop a novel neural-network architecture for erbium-doped fiber amplifiers that, after factory training on a single device and with fully loaded configurations only, generalizes to partially loaded configurations seen after deployment and to different gain and tilt settings and other physical devices of the same type. We combine refined parameters and a novel method that predicts the difference in per-channel power when individual services are added or removed or multiple services are lost due to a fiber cut. The impact of error amplification due to cascading of individual components’ models is shown to be reduced, yielding predictions that are substantially more accurate than simply cascaded predictions. As the network ages, the digital twin can be updated by retraining while using only information available in the current network state.
16 January 2019 in Journal of Lightwave Technology
Time sensitive applications, most notably, for 5G fronthauling and Industry 4.0, require deterministic (jitter-free) low latency, highly reactive, and trustable networks, as opposed to today's best effort Internet. We review existing solutions, both established and at the research stage, and compare them for key next-generation 5G fronthauling and industrial requirements.
26 January 2021 in Journal of Optical Communications and Networking
By associating machine learning and an analytical model (i.e., the Gaussian noise model), we reduce uncertainties on the output power profile and the noise figure of each amplifier in an optical network. We leverage the signal-to-noise ratio (SNR) of all the light paths of an optical network, monitored in all the coherent receivers. The learning process is based on a gradient-descent algorithm where all the uncertain input parameters of the analytical model are iteratively modified from their estimated values to match with the SNR of light paths in a European optical network. The design margin is then reduced to 0.1 dB for new traffic demands.
15 June 2018 in Journal of Optical Communications and Networking
Today’s traditional, hierarchical, full-electronic data centers cannot guarantee quality of service (QoS) for latency-sensitive applications or carrier-grade multitenancy. We propose cloud burst optical-slot switching (CBOSS), an intra-data center network architecture leveraging the original optical components and custom software-defined network (SDN) control to enable traffic engineering. In particular, we demonstrate network slicing on demand with subwavelength granularity and deterministic per-flow QoS guarantees in a 3-top-of-rack (ToR) CBOSS network prototype. We rely on an integrated silicon photonics (SiP) wavelength dropper, a fast-tunable laser, and custom SDN-based controller.