5 May 2017 in Nature Communications
Wide bandgap perovskite oxides with high room temperature conductivities and structural compatibility with a diverse family of organic/inorganic perovskite materials are of significant interest as transparent conductors and as active components in power electronics. Such materials must also possess high room temperature mobility to minimize power consumption and to enable high-frequency applications. Here, we report n-type BaSnO3 films grown using hybrid molecular beam epitaxy with room temperature conductivity exceeding 104 S cm−1. Significantly, these films show room temperature mobilities up to 120 cm2 V−1 s−1 even at carrier concentrations above 3 × 1020 cm−3 together with a wide bandgap (3 eV). We examine the mobility-limiting scattering mechanisms by calculating temperature-dependent mobility, and Seebeck coefficient using the Boltzmann transport framework and ab-initio calculations. These results place perovskite oxide semiconductors for the first time on par with the highly successful III–N system, thereby bringing all-transparent, high-power oxide electronics operating at room temperature a step closer to reality.
11 April 2016 in Applied Physics Letters
We have spectroscopically determined the optical bandgaps and band offsets at epitaxial interfaces of BaSnO3 with SrTiO3(001) and LaAlO3(001). 28 u.c. BaSnO3 epitaxial films exhibit direct and indirect bandgaps of 3.56 ± 0.05 eV and 2.93 ± 0.05 eV, respectively. The lack of a significant Burstein-Moss shift corroborates the highly insulating, defect-free nature of the BaSnO3 films. The conduction band minimum is lower in electron energy in 5 u.c. films of BaSnO3 than in SrTiO3 and LaAlO3 by 0.4 ± 0.2 eV and 3.7 ± 0.2 eV, respectively. This result bodes well for the realization of oxide-based, high-mobility, two-dimensional electron systems that can operate at ambient temperature, since electrons generated in the SrTiO3 by modulation doping, or at the BaSnO3/LaAlO3 interface by polarization doping, can be transferred to and at least partially confined in the BaSnO3 film.
21 September 2021 in Journal of Materials Research
8 February 2017 in Journal of Materials Chemistry C
Adsorption-controlled growth and strong charge compensation accompanied by decreased electron mobility due to cation non-stoichiometry was discovered in epitaxial BaSnO3 films using a hybrid MBE approach.
9 July 2013 in Physical Review B
The Shubnikov–de Haas effect is used to explore the conduction-band edge of high mobility SrTiO films doped with La. The results largely confirm the earlier measurements by Uwe et al. [ Jpn. J. Appl. Phys. 24 (Suppl. 24-2), 335 (1985)]. The band edge dispersion differs significantly from the predictions of ab initio electronic structure theory.
23 December 2022 in Science Advances
The epitaxial growth of functional oxides using a substrate with a graphene layer is a highly desirable method for improving structural quality and obtaining freestanding epitaxial nanomembranes for scientific study, applications, and economical reuse of substrates. However, the aggressive oxidizing conditions typically used in growing epitaxial oxides can damage graphene. Here, we demonstrate the successful use of hybrid molecular beam epitaxy for SrTiO 3 growth that does not require an independent oxygen source, thus avoiding graphene damage. This approach produces epitaxial films with self-regulating cation stoichiometry. Furthermore, the film (46-nm-thick SrTiO 3 ) can be exfoliated and transferred to foreign substrates. These results open the door to future studies of previously unattainable freestanding oxide nanomembranes grown in an adsorption-controlled manner by hybrid molecular beam epitaxy. This approach has potentially important implications for the commercial application of perovskite oxides in flexible electronics and as a dielectric in van der Waals thin-film electronics.