1 July 2020 in Journal of Manufacturing Systems
1 July 2021 in Journal of Manufacturing Systems
1 July 2020 in Journal of Manufacturing Systems
1 September 2011 in Journal of Biomechanical Engineering
The vibration characteristics of shell structures such as eyes have been shown to vary with intraocular pressure (IOP). Therefore, vibration characteristics of the eye have the potential to provide improved correlation to IOP over traditional IOP measurements. As background to examine an improved IOP correlation, this paper develops a finite element model of an eye subject to vibration. The eye is modeled as a shell structure filled with inviscid pressurized fluid in which there is no mean flow. This model solves a problem of a fluid with coupled structural interactions of a generally spherically shaped shell system. The model is verified by comparing its vibrational characteristics with an experimental modal analysis of an elastic spherical shell filled with water. The structural dynamic effects due to change in pressure of the fluid are examined. It is shown that the frequency response of this fluid-solid coupled system has a clear increase in natural frequency as the fluid pressure rises. The fluid and structure interaction is important for accurate prediction of system dynamics. This model is then extended to improve its accuracy in modeling the eye by including the effect of the lens to study corneal vibration. The effect of biomechanical parameters such as the thicknesses of different parts of the eye and eye dimensions in altering measured natural frequencies is investigated and compared to the influence of biomechanical parameters in Goldmann applanation tonometry models. The dynamic response of the eye is found to be less sensitive to biomechanical parameters than the applanation tonometry model.
1 October 2021 in Journal of Manufacturing Systems
9 March 2021 in International Journal of Production Research
A key enabler for personalised product design is an open product architecture that allows the integration of personalised modules to create unique products. Decisions regarding product variety, module combinations, and configurations for personalised modules need to be coordinated with the decisions of manufacturing process and supplier selection when developing personalised product architectures. Conventionally, product architecture, processes, and suppliers are independently determined at different product development stages. However, this sequential design process lacks connection between product architecture, process, and supplier, and may lead to suboptimal or even infeasible design solutions with compromised performance. In this study, a concurrent optimisation approach is proposed to integrate manufacturing process and supplier selection into personalised product architecture design. A cost model is developed as a nexus of product architecture, process, and supplier. Then, a mixed-integer optimisation model is established to maximise the potential profit of a product family based on a profit formulation that incorporates customer preference, process resource, supplier, and manufacturing cost. A genetic algorithm is utilised to solve this optimisation problem. The method is demonstrated on the architecture design for a family of personalised bicycles. The result shows that concurrent optimisation can achieve design solutions with higher profitability compared to sequential design strategies.