In the frame of maintenance, upgrade and dismantling activities, activated equipment are removed from the accelerator complex and require characterization in view of their disposal as radioactive waste. The characterization process consists of a series of radiation measurements, complemented by analytical studies, which quantify the activity of radionuclides inside an object. A fraction of the radioactive waste produced at CERN presents contact dose-rates higher than 100 μSv/h, and can therefore be classified as LILW Waste ("Low and intermediate level radioactive waste"). These objects, due to the activation mechanisms, are often subject to large activity heterogeneities. The quantification of gamma-emitting radionuclides is typically performed by gamma spectrometry, under the assumption of homogeneous distributions of activity within an object. However, this assumption can lead to underestimating the activity value of such radionuclides. In this article we perform a gamma spectrometry qualification in order to quantify the impact of assuming homogenous distribution.
25 May 2024 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Maintenance activities and operations of high-energy particle accelerators can lead to the collection of radioactive equipment as well as waste materials. In order to ensure their proper classification as radioactive or non-radioactive, one has to quantify the activities of radionuclides produced. According to the regulatory requirements in Switzerland, these activities need to be compared with nuclide-specific clearance limits. In particular, a new set of clearance limits was introduced by the Swiss authorities in January 2018, leading to more conservative values for a number of relevant radionuclides. We describe in this paper a new methodology based on dose-rate measurements to classify potentially radioactive objects at the exit of the CERN accelerator complex. This methodology concerns the specific material compositions typically found at CERN and takes into account the latest clearance limits introduced by the Swiss authorities.
Activation of material is of interest for waste treatment and hazard assessment. In particular, activation of printed circuit can lead to the production of radionuclides at an isomeric state, for example, coming from silver. In particle accelerators, the production of silver isomeric states mainly come from low energy neutrons, below 20 MeV. The quantification of activation and associated doses at CERN is based on the FLUKA and ActiWiz codes. In the FLUKA release 2011.2c, all branching ratios for isomer production were set at 50% by default. The present work provides a set of nuclide- and energy-dependent branching ratios, extracted from the library EAF-2010. In the ActiWiz release 3.3, the library JEFF3.1.1 was used for low energy neutron cross-sections. This study provides a new set of neutron cross-sections extracted from JEFF3.3, ENDFB/VIII.0 and EAF-2010 for future update of ActiWiz.
6 August 2026 in Journal of Radiological Protection
At CERN the maintenance and dismantling of high-energy particle accelerators generate waste that is potentially radioactive. When activity levels are negligible, waste can be released from regulatory control through clearance procedures. However, radiological characterisation is challenging due to the diversity of activation scenarios, radionuclide inventories, and material compositions. We address this complexity by developing a data-driven probabilistic approach that combines activation simulations with classical machine learning. This study applies the method to irradiated electric cables, with a particular focus on defining threshold values for measurable quantities (activity, dose rate, and mass) that determine clearance eligibility. The proposed method offers operational advantages by simplifying measurement and decision-making procedures and is consistent with international guidance on clearance.