Water Technologies Innovation Institute & Research Advancement (WTIIRA), Saudi Water Authority (SWA), PO Box 8284, Al-Jubail 31951, Kingdom of Saudi Arabia
Auto-generated profile, based on publicly available information
Fahad Ayesh Alharthi
Water Technologies Innovation Institute & Research Advancement (WTIIRA), Saudi Water Authority (SWA), PO Box 8284, Al-Jubail 31951, Kingdom of Saudi Arabia
Composites are a promising material for high-specific strength applications; specifically, fiber-reinforced polymer composites (FRPCs) are in the limelight for their extraordinary mechanical properties. Amongst all FRPCs, carbon fiber reinforcements are dominant in the aerospace and automotive industry; however, their high cost poses a great obstacle in commercial-scale manufacturing. To this end, we explored alternate low-cost inorganic fibers such as basalt and rockwool as potential replacements for carbon fiber composites. In addition to fibrous inclusions to polymers, composites were also fabricated with inclusions of their respective particulates formed using ball milling of fibers. Considering automotive applications, composites’ mechanical and thermo-mechanical properties were compared for all samples. Regarding mechanical properties, rockwool fiber and basalt fiber composites showed 30.95% and 20.77% higher impact strength than carbon fiber, respectively. In addition, rockwool and basalt fiber composites are less stiff than carbon and can be used in low-end applications in the automotive industry. Moreover, rockwool and basalt fiber composites are more thermally stable than carbon fiber. Thermogravimetric analysis of carbon fiber composites showed 10.10 % and 9.98 % higher weight loss than basalt and rockwool fiber composites, respectively. Apart from better impact and thermal properties, the low cost of rockwool and basalt fibers provides a key advantage to these alternate fibers at the commercial scale.
The scarcity of freshwater resources, driven by rapid population growth and industrialization, underscores the urgent need for advanced desalination technologies. This research aims to meet this critical demand by enhancing the performance of polyamide membranes through innovative chemical tuning of the active layer. By strategically using Boc-protected ethylenediamine (EDA), we can precisely control the membrane’s surface properties. One amino group in EDA is protected with a Boc group, allowing the other to participate in the interfacial polymerization (IP) reaction with meta-phenylenediamine (MPD) and trimesoyl chloride (TMC). This inclusion of Boc-protected EDA enables in situ tuning of the active layer chemistry during polymerization. Subsequent removal of the Boc protection generates hydrophilic ammonium groups on the membrane surface, enhancing its desalination capabilities. As a result, three distinct membranes were fabricated and thoroughly characterized: MPD-TMC (control), MPD-TMC-EDA-Boc, and MPD-TMC-EDA-Deboc. At 20 bar and 2000 ppm NaCl feed, the MPD-TMC-EDA-Deboc membrane demonstrated superior desalination performance with a salt rejection of 98 ± 0.5% and a permeate flux of 25 L m−2 h−1; an increase of 25% compared to the control membrane. For the seawater nanofiltration (NF) permeate with a TDS of 33,700 ppm, a salt rejection of 97% and a permeate flux of 23 L m−2 h−1 was recorded at 20 bar. The MPD-TMC-EDA-Deboc membrane showed enhanced antifouling performance (95 ± 1% flux recovery) compared to the control MPD-TMC membrane with 93 ± 1% flux recovery. The Boc-protection/deprotection strategy demonstrated the high potential of this approach to significantly enhance the performance of polyamide membranes for desalination applications.
Glucuronic acid is a key component of the glycosaminoglycans (GAGs) Chrondroitin Sulfate (CS), Heparin/Heparan sulfate (HS) and Hyaluronic Acid (HA), as well an important metabolite derivative. In biological systems the carboxylate of uronic acids in GAGs is involved in important H-binding interactions, and the role of metal coordination, such as sodiated systems, has indications associated with a number of biological effects, and physiological GAG-related processes. In synthetic approaches to GAG fragments, thioglycoside intermediates, or derivatives from these, are commonly employed. Of the reported examples of sodium coordination in carbohydrates, 6-coordinate systems are usually observed often with water ligands involved, Herein we report an unexpected 5-coordinate sodiated GlcA crystal structure of the parent GlcA, but as a thioglycoside derivative, whose crystal coordination differs from previous examples, with no involvement of water as a ligand and containing a distorted trigonal bypramidal sodium with each GlcA having five of 6 oxygens sodium-coordinated.
Highly purified (99.95%) anhydrous powdered sodium carbonate has been identified as an effective acid scavenger in the reproducible, multi-gram scale tert-butanolysis of acid chlorides. The high yields of tert-butyl esters produced from this reaction indicate that this form of anhydrous sodium carbonate effectively neutralizes the HCl produced in the reaction since the tert-butyl and other bulky alkoxy esters are very unstable in the presence of even trace amounts of a strong acid such as HCl. The variety of carboxylic acids converted to tert-butyl esters in good to high yields reported here-in confirm the broad scope of this approach. The effective replacement of tertiary aliphatic amines and pyridine as acid scavengers for this type of reaction represents both a reproducible and green alternative when multi-gram quantities of tert-butyl and other bulky t-alkoxy esters are to be synthesized. Most reported high yield procedures are based on reactions run at millimolar level and fail miserably when scaled up to multi-gram reactions.
This work presents a novel strategy for fabricating high-performance thin-film composite polyamide membranes by using a sulfonated chitosan interlayer derived from marine crustacean waste, offering a sustainable approach for desalination membranes.